Tom Woods Drive Shaft Measurements

I'm looking to order a double cardan Tom Woods drive shaft for my 3" lifted 2005 double cab short bed (to hopefully solve vibration issues). I found these measurements from another thread and I'm wondering if they are the same for my truck...

Finished running length from face of flange to face of flange=67.5"
(I think this will probably be different for my truck since these measurements are from an access cab and mine is a double cab)

A=1.812" B=3.69" C1=C2=2.6"



If anyone can confirm whether or not these measurements match my truck I would really appreciate it, thanks!

P.S. My lift includes 3* axle shims so that's why I've decided to go with the double cardan drive shaft.

 

If you're ordering a custom drive shaft, it's in your best interest to take your own measurements. I would absolutely NOT use someone elses, even if it was the same model truck and similar lift as yours.

 

I called TW a few times and they wanted the flange to flange measurements not the face of the flange.

 

I can't imagine that you're flange measurements would be different. If they are not measuring to the face of the flange then their diagram is incorrect i will be sure to double check when I call does anyone else out there care to post their flage measurements now I am curious.

 

FWIW.
http://www.tacomaworld.com/forum/suspension/327921-tom-woods-drive-shaft-information.html