1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Wheel/Tire Help! 03 Tacoma with 3" AllPro Lift

Discussion in '1st Gen. Tacomas (1995-2004)' started by bobbyworks, Jun 25, 2014.

  1. Jun 25, 2014 at 9:58 AM
    #1
    bobbyworks

    bobbyworks [OP] Member

    Joined:
    Nov 7, 2013
    Member:
    #116135
    Messages:
    5
    Gender:
    Male
    Hey Guys,

    Need some advice, I am currently running the following setup on my 03 Taco:

    3" All Pro Lift Front/Rear with Bilstein 5100

    I have TRD Trail Teams 16x7.5 4.5" BS with 285/75R16 which fit perfectly and do not rub at all with FULL articulation.

    Now the question is, can I run a 305/70R16 without any issues?

    I don't need a taller tire - I am looking for a wider foot print.
     
  2. Jun 25, 2014 at 7:41 PM
    #2
    TimPall13

    TimPall13 Well-Known Member

    Joined:
    Aug 1, 2012
    Member:
    #83897
    Messages:
    271
    Gender:
    Male
    First Name:
    Tim
    Sandy Oregon
    Vehicle:
    3link SAS 02 SR5 Limited V6
    Lift: TrailGear 3link SAS with Fox 2.0 Coil overs in front. Custom Alcan Leafs with relocated Fox 2.0 shocks in rear. Sitting at 6in of lift. Armor: Relentless Fab Front bumper with home made hoops and Warn VR Evo 10s winch. Relentless Fab Rear bumper with swingout gate. Gears/Grip: 4.88 gears with ARB Air lockers front and rear. 35x12.5 Mickey Thimpson Baja Boss MTs on 17in Trail Ready Beadlock wheels. Lighting: 6000k 55w HID head lights in Retrofit Prejectors, KC Slim Light LEDs behind a Grillcraft grill and on CBI windshield mounts, And LED rock Lights. Performance: 6" deckplate mod, URD Crank Pulley, K&N air filter, ISR mod, and a AirRaid throttle body spacer, magnaflow muffler. Audio: Alpine speakers and sub running on a Alpine 5ch amp. All ran with Stinger wire kit, and a Alpine touch screen reciever. Extras: 15% Window Tint, Spray in bed liner, LineX coated factoey fender flares, Custom Roof rack/Track system, SoftTopper Canopy, Viair Dual 444c Onboard air with dual 2.5Gal tanks.
    Welcome to TW! To answer your question, I run 305/70R16s and i had to do some minor trimming of the lower plastice piece on the bumber. I also had to do the pinch weld mod. Other than that i have no issue with rubbing unless the wheel is turned all the way. Then tire rubs a little on frame. But besides that i like mine. :)

    Tim
     

Products Discussed in

To Top