1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Alarm box placement

Discussion in '1st Gen. Tacomas (1995-2004)' started by iamjustifyd, Jun 22, 2014.

  1. Jun 22, 2014 at 2:11 PM
    #1
    iamjustifyd

    iamjustifyd [OP] Well-Known Member

    Joined:
    Dec 20, 2009
    Member:
    #27895
    Messages:
    84
    Gender:
    Female
    First Name:
    Sherry
    new orleans
    Vehicle:
    2023 Limited
    Hello, I had to replace the switch for the alarm. The remote broke and had to buy a new one only to find that the switch on the kick panel was broken. Replacing the actual switch was no problem but to put that box back where it was before I would have to be a contortionist. It was at the top of the kick panel. Either I have to find a new place or learn how to zip tie and hold the box using one hand, I just can't get both hands up there. Any ideas?
    Thanks!
     
  2. Jun 25, 2014 at 7:57 PM
    #2
    TimPall13

    TimPall13 Well-Known Member

    Joined:
    Aug 1, 2012
    Member:
    #83897
    Messages:
    271
    Gender:
    Male
    First Name:
    Tim
    Sandy Oregon
    Vehicle:
    3link SAS 02 SR5 Limited V6
    Lift: TrailGear 3link SAS with Fox 2.0 Coil overs in front. Custom Alcan Leafs with relocated Fox 2.0 shocks in rear. Sitting at 6in of lift. Armor: Relentless Fab Front bumper with home made hoops and Warn VR Evo 10s winch. Relentless Fab Rear bumper with swingout gate. Gears/Grip: 4.88 gears with ARB Air lockers front and rear. 35x12.5 Mickey Thimpson Baja Boss MTs on 17in Trail Ready Beadlock wheels. Lighting: 6000k 55w HID head lights in Retrofit Prejectors, KC Slim Light LEDs behind a Grillcraft grill and on CBI windshield mounts, And LED rock Lights. Performance: 6" deckplate mod, URD Crank Pulley, K&N air filter, ISR mod, and a AirRaid throttle body spacer, magnaflow muffler. Audio: Alpine speakers and sub running on a Alpine 5ch amp. All ran with Stinger wire kit, and a Alpine touch screen reciever. Extras: 15% Window Tint, Spray in bed liner, LineX coated factoey fender flares, Custom Roof rack/Track system, SoftTopper Canopy, Viair Dual 444c Onboard air with dual 2.5Gal tanks.
    Is that with the panel removed? If so then maybe just move it over a bit for easier access.

    Tim
     

Products Discussed in

To Top