2nd GEN Dbl Cabs with 883's

Anyone here with a TRD 2nd GEN dbl cab (V6/4wd) running 883's? I am interested to know if you are getting a good alignment without UCA's. Likewise, I would like to know if they will level the front if I install the OEM TSB 4 leaf pack? I currently have 884's and I am not sure if I will have too much lift in the front. Thanks guys! Jay

 

your 884's on a double cab will give just under 2 inches of lift, with the tsb spring pack you should be nice and level, 883's will give you about 1 inch of lift. either will result in good alignment, no need to drop down to 883's. no control arms needed.

 

What about after the tsb's settle? Any idea how much the rear will drop?

 

I just installed the TSB's and the front is high. I also have positive camber with my 884's which is going to destro my new tires in no time. The question is if I switch to 883's will it be low enough and will I need UCA's to get 0 camber and a decent amount of caster (2.5)