water/meth kit

i have a 2010 taco with a supercharger and i was thinking bout getting a water/meth kit for it.
was wondering how it will work and what gains i will see?
open to ideas guys

 

For hot summer days; it works great 70/30 water methanol mix... You can use the factory wiper blade reservoir for the tank. I would change the pulley to a 2.85 first... Get my boost up higher so you have a better window for the boost switch. #3 nozzle would probably be a good start

 

yea any suggestions on a kit?
i have room to add another tank for it if need?
i heard you can use washer fluid?

 

I have an AIS... Devils own is good too. There really is no need to have another tank; these factory wiper reservoir hold plenty. Yes the cheap blue wiper fluid is about 70/30 mix; when you shake up the bottle the less bubbles the better... Or you can measure out a bottle of heet and distiller water.

 

ok is there a place a can get the kit with everything that will be needed?
should i get the 7th injector and use that to inject the the water/meth?

 

Well I mentioned two; check the company websites. These kits can be very simple; boost switch, pump, nozzle, tubing, and components... Reservoir tank your choice... You can either tune for meth spray or just use it as a cooling effect for heat soak. I assume you will do the latter and use a boost switch to control spray timing.

I'm not going to say it's impossible to use a 7th injector... Most kits come with two nozzles, which spray/inject anyway. I would recommend a #3 nozzle based on your mods and boost. You definitely need an boost gauge and preferably an aftermarket CAI for nozzle placement and 2.85 pulley for reasons I stated before

 

yea im in the process of finding a good cai. im leaning towards the volant with air scoop. yea im gonna order the pulley pretty soon here and same with the boost gauge

 

ais site is down i think

this a good kit
http://www.coolingmist.com/pagedisplay.aspx?pid=cms1deluxe&feature_key=turbo_kits

 

Yes that kit looks very similar to the AIS system I have. Nickel plated is good, and the pump looks identical. Only thing different is that solenoid; I have a check valve.

Curious why no one is chiming in on the subject; especially the 1st gen, they know much more about using meth spray than most

 

yes where is everybody i wanna information before i purchase stuff

 

Talk to the guys over at ALKY. I work at a performance shop and we have been using ALKY on every forced induction build we have done. Including a SN95 Cobra that made 1,140whp... So yea if you wanna go a good route use ALKY.

 

yea ill have to email them and see what they recommend