foglight gone bad

hey guys! i wanted to see if y'all can help me. Well a couple of months ago i was sadly dumb enough to cut off the stock foglight wires and put in a new relay. now i wanna put my foglight back to the stock mode but idk if i should just strip the wires i orginally cut off and put the wires that connect to the bulb in or take it to the dealer.. what can i do?

 

Im not sure what you did but just try to reverse it

 

basically i cut off the stock tacoma fog lioght wires and put a relay to replace it. now im trying to put it back to stock but im not sure how im going to plug in the bulbs if its just 2 wires hanging

 

Where did you do said cut?
At the light?
All you need to power lights is two wires, positive and negative. More details would help

 

Wait... You knew enough on how to wire up a relay but you don't know how to return it back to the way it was???

#1: Remove relay

#2: Assuming you have enough wire splice them back together with connectors.

#3: Assuming you don't have enough wire. Buy more wire of the same color and splice them back together with connectors.

 

i cut right before the plug I wanna say where you connect your foglight bulb/hid. If its 2 simple wires I'll give it a try

 

is it that easy? I doubt myself due to the fact that I was dumb enough just to mess with the stock wiring

 

Unless you've done something that is unusual then yes, it should be that easy.

 

alright will give it a try laer on! thanks a lot!