Fog light HID Projector Matchbox Retrofit

Started my fog light HID Projector Retro. Using Matchbox TRS Kit. Will post pics soon. So far they look like they will work great.

 

Fog light cut open. I used another guys advice and cut along the lens line.

 

Subbed. Good luck Ty. I just sent my heads and fogs out to a shop with the matchboxes also. Very few have done it. curious to see if i'll need some form of protection for the projector from the rear ( rubber boot? )
Either way good luck

 

Pics or it didn't happen.

 

Sorry I only have a few, and they didn't upload for some reason. Just now at paint stage. I have pics the whole way and will post

 

Sorry to revive an old post...how did the Matchbox retrofit turn out?

 

Went good. I would do it a bit different next time. Because i cut the lens off. When iglues it back on it has a white ring now. So next time i would use a black glue. The one leaks a bit. So it fogs. I will re do that one. But all in all it was fun to do. And worked out good. They are a BiXenon so low and high beam. I removed the high beam cut off shield. So its on high beam always when they are powered up. What happens is there is a little metal shield that flips down when you activate high beams to release maximum light. So i just removed it entirely.

 

I suggest getting a butane pencil torch and cut it open that way, then when your done melt it back together.