1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Can ScangaugeII display trans fluid temp on 5 spd manual?

Discussion in '2nd Gen. Tacomas (2005-2015)' started by Petrie, Aug 23, 2014.

  1. Aug 23, 2014 at 12:25 PM
    #1
    Petrie

    Petrie [OP] New Member

    Joined:
    Mar 13, 2014
    Member:
    #125267
    Messages:
    2
    Gender:
    Male
    So. Berkshire Co., MA
    Vehicle:
    '11 AC SR5 4x4
    Just got a scangauge and put in the codes below. Im getting null readouts in both x-gauge slots. Is it true that the 5spd manual transmission has no temp sensor? Is high fluid temps not an issue for the manuals? (first post... did plenty of searching)


    Codes used:
    Transmission Temperature 1 (Degrees F) 2010+
    TXD: 07E02182
    RXF: 046105820000
    RXD: 2808
    MTH: 00090005FFD8
    NAM: TF1

    Transmission Temperature 2 (Degrees F) 2010+
    TXD: 07E02182
    RXF: 046105820000
    RXD: 3808
    MTH: 00090005FFD8
    NAM: TF2
     
  2. Aug 23, 2014 at 12:44 PM
    #2
    bicyclist

    bicyclist Well-Known Member

    Joined:
    Nov 17, 2013
    Member:
    #116732
    Messages:
    179
    Gender:
    Male
    That is correct. The fluid in a manual is oil. It's primary purpose is lubrication.

    The stuff in an automatic is hydraulic fluid. It transfers energy and gets hot in the process.
     
  3. Aug 23, 2014 at 12:56 PM
    #3
    Petrie

    Petrie [OP] New Member

    Joined:
    Mar 13, 2014
    Member:
    #125267
    Messages:
    2
    Gender:
    Male
    So. Berkshire Co., MA
    Vehicle:
    '11 AC SR5 4x4
    Okey doke. Thanks guys, much appreciated!
     

Products Discussed in

To Top