Somebody Help Me Out!!!!

Please!!
I make sliders for people locally and I know that the 05-11 frames are slightly different than my 12-14 frames...
So I was wondering if someone can measure something for me?

There's a frame rivet towards the rear of the frame right above the rearrests oval looking hole.
I need to know how high that rivet is from the bottom of the frame. and how far over from the center of the oval hole. Thanks a bunch!!

And I know I could just go find any Tacoma and go measure myself. but ide rather not go snooping around under someones Tacoma and than leave.

 

bump.... Its that frame rivet right above that oval hole..

 

That on the passenger side?

 

I looked again. My rock sliders are mounted right there on my 2011. The isn't a rivet on mine in that spot. The piece on the inside of the frame is welded right there.

 

?

Anyone else got something different?

 

Awsome!! thanks soo much. I know I checked a 07 awhile ago. and it had it... but this was before I was going to start making sliders for people.

 

Anyone have a 05-09 that can look?

 

'07 4 banger. Its 3.75 in from bottom of frame to the center of the rivet

 

Thanks man!! How about from center of oval hole over to center of rivet?? Horizontally

 

And is it just the passenger side?

 

Same for passenger and driver. I didn't measure from center to center but i did measure from the center of oval to front edge of rivet. that measurement is .75''

3.75 from bottom of frame to center.

driver side



passenger side

 

Awsome!! Thank u soo much man.

 

No problem man! If you need anymore help just hit me up.