all you dana 44 sas's

roughly just curious to know your front spring lift, plus the spring over lift gained, and then what degree you turned you knuckles hopefully youll all post your specs, if using a wagoneer dana 44

 

also my door plate says. b07a

would that imply my truck has factory 4.30's?

 

Lowest spring lift possible... usually 3" anymore and it's way too much.... generally gives about double the lift. I never turned my knuckles so can't help ya there.

Biggest thing that dictates the height of the truck is the shackle angle... Make sure it is 45* AT RIDE HEIGHT. During full droop it should not be anymore than perfectly straight up and down.

 

alright thank you, ive been seeing any where from 6* to 12* and hearing 10* on the pinion then rotate the knuckle back 6*. but a total of 10* at the knuckle would be around the same?
so im curious to see what people are using and getting good steerimg results with

 

bump anyone?

 

Try searching on ttora or pirate... There is a bunch of info on it. Not much info here.