Help ac inop and airbag light on working on radio

I'm not at work to have access to all my tools I'm working on my radio and now my ac is inop airbag light on. Truck is running any ideas?

 

Sounds like you didn't plug connectors in all the way for AC, and which air bag light? Dash or center under radio?

 

Never unplugged the control head

 

Sounds like you popped a fuse then, check that. And which air bag light? Dash, or under radio?

 

Dash ligjt

 

Ignition 1 fuse blew how I don't know bit it's fixed now

 

You said its running. Will it go into gear? Similar happened to me and it wouldn't go into gear. Don't remember if it was ign1 or ign2 fuse.

Well shit, that's what I get for having slow net service.

 

I was setting up a parking brake bypass for my radio apparently the old relay method doesn't work any more so I removed it and that when the fuse blew.

I have a $10k snap-on scan tool at work and access to all the information I could ever need but I ain't got shit at home

 

Just ground the wire that is supposed to go to the parking brake, I used the metal bar behind the radio as a grounding point. This will put the radio into "display mode" and you will be able to watch movies without applying the parking brake.

 

Can't do that on the new pioneers something about a double impulse it has to see ground after it turns on. The bypass kits are cheap I could make my own if I could find a how to

 

Here is a cheap one http://www.amazon.com/PAC-TR-7-Universal-Trigger-Output/dp/B0002J22BO