1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

wiring 2 pole ign switch on dirtbike

Discussion in 'Technical Chat' started by anthony250f, Sep 22, 2014.

  1. Sep 22, 2014 at 11:30 AM
    #1
    anthony250f

    anthony250f [OP] Well-Known Member

    Joined:
    Feb 18, 2012
    Member:
    #73066
    Messages:
    16,703
    Gender:
    Male
    First Name:
    Anthony
    San Diego, CA
    Vehicle:
    2008 dcsb trd offroad 4wd
    i wired in a ignition switch (key) on my dirtbike and it doesnt work...one pole goes to ground and the other goes to some other wire that was hooked up to the push button switch....when the key is off the circuit is closed, therfore the bike can start. When the key is on it completes the circuit therefore the nike CANT run because its grounding the bike....this is completely backwards and i cant for the life of me firgure out how to make it correct


    any ideas???
     

Products Discussed in

To Top