285/75/17 on '13 regular cab

285/75/17 on 2013 regular cab tacoma with a 2" spacer. any thoughts/ comments/ suggestions? i dont mind trimming....

 

Trimming for sure.

 

34" tire, you got a lot of trimming, cutting and pounding to do

 

Any mods to accommodate those tires?

 

Cmc

 

buy a grinder, skill-saw, saw-zall, sledge hammer and a bible, then they fit just fine. i have 3" lift and having issues fitting 285/70/17

 

Had an 07 with 255-85-16 MT's (33.5-34'').

I did not require cutting. They cleared fine. I had an OME kit and Alcans in the rear.

With only a spacer lift, be careful adding the additional stress of heavy tires. Not only to your suspension, but engine and clutch. I went from 24 mpg to 15 mpg. Ended up with 235-85-16 All Terrains (a great size for a 2.7).

Without a regear, 33's on a 2.7 is just too slow in my opinion.

 

What he said.

 

thanks guys!

 

Have 34" tires on my '12 Sport, 305/70/17.
2 1/2 to 3 " lift, CMC, big time trimming, f that, cutting fenders and flares. 4.3 inch backspacing on wheels or would be rubbing frame hard at full lock.
Your cruz control will hate those tires just as much as your gas milage.

 

installed a 2.75" spacer in the front and it cleared my 285/70/R17's. mpg decreased a bit and i max out about 80mph haha! need to recalibrate speedo tho

 

Look pretty good