OEM replacement shocks/struts, 99' 4x4

I'm looking for suggestions on OEM replacement shocks/struts for a 99' 4x4 TRD Tacoma for mostly highway use. My main goal is to get rid of some rear end shaking at highway speeds that I can't seem to solve, especially when towing. For mostly highway use and only crawling speeds off-road, is there anything better than the OEM Bilsteins?

 

Do you want the same stock ride something a little stiffer what's your preference

 

Stock or a little firmer would be fine, just not looser than stock. From reading around it looks like Bilstein 5100 series look good, but I'm unclear if the rear 5100 are OK with the stock springs and ride height. I do wish to keep the stock ride height. I tow and/or carry weight in the bed fairly often.

 

Yes i recommend the 5100s then a little stiffer. They work with stock springs they have different settings you can set the perch the bottom setting is 0 which will be stock ride height the next is .85 the 1.75 then 2.5. Keep the perch at 0 put the stock springs on and it will work out perfect i just bought 5100s and some ome lift springs it seems like you can't beat the 5100s for the money. And i believe they have lifetime warranty

 

Great I'll give them a try , thanks! Did you have to order front or rear bushings separately, or were all bushings included with the shocks/struts?

 

Bushing were included with mine bought on ebay,yiu van reuse the stock bushings but I guess new shocks would be good to go new bushings to its up to you look on ebay and get them included I paid 320 front and rear

 

My OEM parts have almost 180k miles on them so I'm going to replace as much as I can. . Thanks!

 

Yep no problem

 

To replace the top strut bushings, do you have to replace the entire mount? The OEM mounts are about $60/ea, number 19 in this diagram, I'm wondering if there's a way to replace only the bushings?

http://tps.toyotaofdallas.com/parts...siteid=214074&vehicleid=69979&diagram=8510190