ScanGauge II install location

To those that have a one of the ScanGauges, where did you install it (specifically.....saying the inside of your truck doesn't count)? Pics would be cool.

My initial thought was in the center cubby space under the dash by the 2 front cup holders; I was thinking of getting some plastic and make a "slot" for it.

Thanks in advance

 

I attached the belt clip from a 30' measuring tape reel to the back of the scangauge
with a screw

then clip the scangauge on the little lower cubby that is just below the 4x4 switch area

 

Used the velcro provided to mount it on top of the steering column

 

I don't have a 4X4 but the switch is under the clock correct? The belt clip is something I didn't think of....thanks for the tip.

 

I considered this but am searching for something a little "cleaner".

 

http://www.tacomaworld.com/forum/2n...-done-your-tacoma-today-2684.html#post9233237

a couple of search clicks yielded this. Try it.

 

Thanks bicyclist - I actually looked there too but wondered what it would look like; now I know.

 

Here's a thread with a few other good ones:

http://www.tacomaworld.com/forum/2nd-gen-tacomas/21026-scangauge-ii-mounting.html

 

Thanks geekhouse23....some good info there...I admit that I didn't search at all. Yeah I know I should have.