1.25" Bora Spacers fit without trimming lugs?

Gents,

I just got the black 1.25" bora spacers and about to put them on. I'm doing in it my garage but I dont have tools if I would need to cut the stock lug so my tires fit the spacer without any original lug protruding.

SO: do I need to cut anything or can I just slap the spacers on, then wheel and be good to go?

Also: I have motometal wheels with lock nuts, do I use the nuts that came with the spacers to mount the spacers (are both lugs the same diameter?) or am I supposed to not have lock nuts anymore since the nuts came WITH the spacers?

Thanks for the help?!?!?

 

Ok, yea they did come with tiny lugs. My only other concern was if the stock stud stick up too far and my wheel cant sit flush, is that ever a problem?

 

They fit fine, no trimming of the lugs themselves. only problem was once I put weight on the wheels (off the jack) they rubbed the frame itself when turning to the right (for the passenger wheel). Im just gonna have to wait and put them on after I get cab mount chop done and put the 35's on. So for now the spacers will collect dust unfortunately. Thanks for the help