How big can I go???? All help and advice needed!!

Hey guys Ive been around for a while but haven't posted much, but here's my question ( all help and advice needed!)..
I have a 2011 tacoma 4dr trd. I bought a bilistien 3" suspension lift kit, new springs for front and add leaf in rear with new shocks all around, along with new uca's.
I want to get 18x9" wheels ( bmf novakane 6 with 0mm off set (only way they come)) and run a 33x12.5 tire!( toyo open country mt )
Will this set up work with out trimming of any kind???

 

I in the same situation. I'm looking at 18x9 but they only come -12mm or +12mm. I have asked but not really getting any good answers. I have talked to a local 4x4 dealer and they said your best bet is 0mm. If you want to go without rubbing but they also said you will definitely rub with a tire that measures 33" and 11.5" wide. I have been looking at pictures of what other people run and the nor seems to be -12mm. I have seen 0mm but I'm sure they will rub with that tire. I'm not sure if I helped you any but I will be glad to help as I'm getting ready to by 18x9. I'm waiting to do my 3" until I have my wheels and tires.

 

Hey Tim, I went with a 0mm BMF wheel with 33x12.50's on a 3" suspension. I've trimed my mud flaps a lil bit but the out side of my tires scrub on the cab mount when I turn a lil less than sharp. Doesn't take much to scrub but I'm getting use to it and getting around it. I've heard of people on here cutting their cap mounts. Not sure if I'm up for that, as soon as these tires wear down a lil I don't think I'll have any issues unless it flexes while turning. All in all I love the look of this size but wish it didn't scrub as much. I haven't got around to posting any pics but will as soon as I can. Maybe it will help u.

 

Forgot to mention, in the front my driver side is 3"3/8 and passenger is 3"1/4. I used the 1/4 driver side correction that was sent with the lift on passenger and made a 3/8 spacer for diver side..