FS: Built 2012 $28k - $14k+ in mods [Houston]

Obligatory wheeling pics​

Unfortunately I have to part ways with my baby, only selling to buy my dream house.

Please read entire ad before contacting me.
This truck was built and used for trails and has never let me down.
$28k truck with over $14k in mods. Has some quirks though which I will list here.
Snorkel head was ripped off and replaced with a Donaldson pre-filter
Pillar clip didn't fit right so the snorkel head is zip tied on
Makes a pop noise on first start up when turning right from front left wheel
Dents in all 4 corners and tailgate, one noticeable under passenger headlight
Scratches down the truck, some small some more noticeable, small hole in passenger mirror from a tree limb
Grill was painted poorly and clips are broken on the bottom but still stays put
All 4 wheels have rock rash
Steering wheel shakes when braking, warped a rotor from not setting pads properly
35-40 mph vibe, from front driveshaft
Irreversible mods - aggressive cab mount chop, cut front fenders (planned on glass in the future) but rear fenders are untouched
Small crack in windshield
No sway bar
Some wiring can be cleaned up but nothing major
The 20" rigid stopped working, should be an easy rebuild or you can trade it in for another discounted 20 SR
Ripped OEM antenna off, have an antennax shorty to be installed when I remove the old screw from the OEM hole
Winch controller is rigged up, I wired it only to remotely spool in and free spool out, there is no remote spool out which should not be an issue.
The front still rubs (when you switch to 35s, you wheel, hammer and repeat until there is no rubbing) and the rear touches a little at max stuff.

Refer to the mods spreadsheet to see what is included in the sale.
Sale also includes a set of super white fender flares, fronts are cut and rears are un touched, only have not mounted because I don't know how I want to.
Full sized spare w/ another stealth 6 wheel.
I don't have to say this buy the maintenance done on this truck was done by me and it is / was done all impeccably.
Tires have 10k miles on them and have been wheeled once, no plugs or patches and still look new. Comes with a transferable discount tire warranty.
Truck still runs like new and tranny shifts smooth like it should.
If you are serious send me a PM and I will give you my number.
$28K OBO

Not parting out

Edit 1 - Jan 20: Someone pointed out to me that I should list my mods instead of putting them in a picture of excel

Suspension
OME 886
Nitrocharger Shocks
Total Chaos Uppers
Sway bar removed
Iron Man 4x4 Rear Leaf pack
Nitrocharger rears
All Pro ubolt flip
Timbren bumps

Drivetrain
4.56s F&R (Nitro)
ARB front air locker
Factory rear E-locker

Armor
Pelfreybilt front IFS
Pelfreybilt mid
Pelfreybilt t-case
Pelfreybilt Sliders w/kick
Pelfreybilt front plate w/ single hoop
DerpWerx custom rear tube bumper
48" Hi-lift w/base

Wheels / Tires
SCS Stealth 6 (5)
315/70R17 Hankook Dynapro ATM (5)

Air
Viair 440P (Tires)
ARB - CKMA12 (For locker)
ARB tire inflator
Stainless plumbing (Swagelok)

Misc
Spare drive shaft
Spare rear axle
Spare spindles
Spindle gussets (not installed)
Cam gussets (not installed)
Pelfrey battery cage w/Die hard M31
Air Flow snorkel w/ Donaldson prefilter
Cobra 75 CB
Relentless hood mount
Diff breather in tail light
Stock headlights
Rigid 20 SR in pelfrey bumper
Rigid D2s (amber) fog lights w/ rigid amber cover
Rigid D2s diffused flush mount in rear bumper
Vision X Rock light kit
Warn VR12000 w/ synthetic rope
Smitty bilt shackles (5 or 6)
Daystar rubber on shackles
UWS low pro tool box
Misc recovery gear
In cab controls for everything
Soft Topper
BeeRad LED Whip
FamousFab tailgate mount
ATO trac bar
4xInnovations tube doors (front only, for now)
Pioneer wakeboard speakers
.. I am sure I am missing stuff but I will update as I think more

Edit 2 - Jan 20: Added spindles, spindle gussets and cam tab gussets to the spare parts.

Edit 3 - Feb 03: Sale is on hold.

 

Interesting

 

Yep. I plan on DD'ing the Ferd.

 

Good luck with buying the new house. Sad to see you get rid of the taco, but I can understand priorities.

Bump!

 

at least he's not saying he's going to buy a dodge diesel... lulz

 

Thanks, not going anywhere though as I already have a lead on a beater to wheel.

lol.. idk who you are referring to

 

Large you have a sweet truck my friend. Sad to see her go but understand the situation. Bump for a good guy. This is a hell of a truck!

 

Always gotta act Like little gossiping highschool girls ...

 

welcome to TW

you must be new here...

 

Subd for the partout >.>

 

hey nice truck, what is that tailgate pack you have?

 

It's a trasharoo

 

Thanks broski

Dick

VVV

 

Awesome, great truck man, GLWS!

 

Might be willing to part out if there is not enough interest here pretty soon.

Thanks!

 

Come on somebody buy this truck...it obviously works well off-road. Look elsewhere if you want a mall crawler

 

Thanks man. It does astoundingly well off road, I did go a little overboard on the build though. I have a body/paint guy I think I will use to fix it up and paint it back to 040, just waiting on the quote to see how much it will cost then have to plan the part out is all.

To lock a truck front and rear, with gears and armor costs a lot. I really don't think I will get anything near my ROI with the stuff on the truck, so I will just remove it all and go from there.

Sad day but I don't regret any of it.

 

How many miles?

GLWS!

 

70.3k