33x12.5x18 with 18x10 -24 offset 4.5 bs

I'm wanting to run 33x12.5x18 Atturo Trail Blades with 18x10 -24 offset 4.5 backspacing Fuel Throttles on my 05 Taco with a 3" lift. Has anyone ran a setup like this that could help out? I would like to avoid trimming if possible. Just want to get an idea of what I'm getting into before I spend a lot of money and run into problems. Thanks

 

I think you're going to need more than 3" of lift if you don't want to trim. When I had a 3" lift, I had to trim a fair amount to fit 33x11.5 (285/70R17) and still rubbed on the frame.

 

Yeah you would be doing some trimming what that set up. And a cab mount chop.