14 nav into a 13 with backup camera mod

I just installed my radio into my truck from FLTrucks and its awesome. I wanted to switch my camera into the radio since thats how our 4runner is as well.

The harness came off ebay for like 70 bucks. This comes with a 2013 16 pin connector as the 2014 radio has a 24 pin. This is pretty easy to make work for the new radio.

Here is the 16 pin that needs to be modded to fit the 24 pin on the new unit to the far left. You will have to either cut a grove or melt a grove like i did so it will slide in. Its a tight fit once done and i dont feel it will work its self out.




Make sure that you pay attention and put the pin into the 2nd to last looking at the wire side on the top. I put the pin in the 3rd and was racking my head why it wouldnt work on my 13 and the new unit.



right above the clip the harness plugs into you need to tap into a red wire (at least on mine) Make sure this is powered when you put it in reverse I did not and had to repair the wire i cut. The one i tapped into is the lower red wire 4th over on the bottom



If anyone has a question i will try to help but im not really good at wiring. hope this helps someone

 

info i found and also shows the part number for the 24 pin connector
http://www.tacomaworld.com/forum/audio-video/304014-2014-navigation-unit-2013-a-5.html

Ebay harness for the 10-13 with back up camera
http://www.ebay.com/itm/321276767143

 

Thanks!

 

Welcome