Converting Electric t case to manual t case

I have a 95 tacoma 3.4 manual transmission with the push button 4x4 switch on the lever. I got a chance to buy a 93 toyota truck and the t case has 2hi,4hi and 4lo was wondering if it will bolt right in.... It also has all the manual hub gear too but was just mostly curious about the t case my electric motor on my t case crapped out and they r not giving them away so would sooner have manual t case any info be greatly appreciated

 

I believe the front drive shafts are on different sides.

 

This is a good source to figure out what you have and what you believe you need to do
http://www.4x4wire.com/toyota/faq/parts/

 

I looked at the 93 and yes driveshaft is on wrong side so does anyone know if 4 runners came with a manual t case and will they work in my truck and what years will work my question mark button on pc is broke lol thanks

 

My 92 4runner is a 5-speed with a manual case but any thing with a 3.0v6 or 2.4 is going to have the shaft on the wrong side.you need to find a tacoma (95-04) with a v6 5-speed with a manual case.

 

So today done some calling around to salvage yards and found a manual shift transfer case out of a 98 tacoma 5 speed tranny so i am hoping i am good to go gonna try and install it this week end I never asked them if it had manual hubs but i am gonna so i can change everything over hopefully

 

Make sure its for an r150f transmission (v6) or its not going to work.

 

So i called salvage yard back today to see if the 98 is a v6 and it is woo hoo it is gonna be delivered tomorrow or monday they wasn't sure if they would have it out for tomorrow i can't wait be a joy to have 4x4 back with all this snow thanks everybody for the info this forum is awesome