@05-15 Tacoma Antenna/Led Pod/Camera Mount

The hole on our mount is 3/8.

Let me know if you need anything else.

 

Thanks! will have to drill it a bit, NMO is a 3/4" hole. still may pull the trigger on it, it's a nice looking mount and the placement I wanted.

 

For most antenna mounts we realized the hole is bigger, but since you must ground the antenna anyways when you drill it, it leaves it the perfect place to ground it.

 

Some many options you can add with our CB mounts

 

Bump!

 

https://caliraisedled.com/collectio...oma/products/05-15-tacoma-bed-accessory-mount

Bed accessory mount wired up to our 20w flood light!

 

Bump!

 

Any idea if these fit with a Leer 700 tonneau?

 

Can you attach a photo of the shell by the tailgate gap. We have a lot of customers with shells using these it just depends how far yours sits off the truck

 

I'll get you one tomorrow!

 

Here’s a customer with our Bed accessory mount with our amber pods attached to it! Great for dusty trials!

 

is anyone here running this mount successfully on a 2nd gen with the addition of a SnugTop as well??

on the 3rd gens the mount seems to sit a tad lower than on a 2nd, worried if I order one up that it will interfere with the cap.

 

I have them but havent put anything on them i have an are cap

 

yea there is a picture on page 2 of this thread with a 2nd gen and an ARE cap using this mount
my concern here is I believe the SnugTop caps bottom edge sits lower than the ARE does

 

As promised:
Normal closed position, covers all visible plastic bed protectors: https://i.imgur.com/gYVcMa7.png?1
Overhang is almost exactly 1": https://i.imgur.com/GqpTzx1.jpg?1
Ruler was placed flush with the bottom of the shell: https://i.imgur.com/SGMORa1.jpg?1

From this picture on page 2 it seems like it's a close fit, judging only by the plastic bed caps.

 

Unfortunately it does not look like the bed mount will fit!

 

Thanks anyway. I got some of your ditch lights on my wishlist, tho!

 

No problem, if you need anything else feel free to let us know!

Jake

 

https://www.tacomaworld.com/threads/rock-sliders-pure-rock-sliders-and-step-rock-sliders.565425/

Check out our new thread about our Rock Sliders!

 

https://caliraisedled.com/collectio...oma/products/05-15-tacoma-bed-accessory-mount
Heres a customers Truck with our Bed accessory mount