1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

08 wiring harness

Discussion in 'Audio & Video' started by bcmedic, Nov 6, 2008.

  1. Nov 6, 2008 at 11:15 PM
    #1
    bcmedic

    bcmedic [OP] Well-Known Member

    Joined:
    Sep 3, 2008
    Member:
    #8983
    Messages:
    134
    is the factory wiring harness different for non jbl vs jbl ??
     
  2. Nov 9, 2008 at 2:18 PM
    #2
    LBCtaco

    LBCtaco Member

    Joined:
    Apr 22, 2008
    Member:
    #6119
    Messages:
    23
    Gender:
    Male
    Long Beach
    Vehicle:
    06 PreRunner TRD Sport
    5100's w/885's, Toytec AAL, Konig Countersteer Offroad Type-X, K&N Intake, 6K HID's, Yellow Fog Lights, Color Matched Running boards, , Snug top SL Lid
    Yes. If you have the JBL system and will be using the Amp you need the harness with the black box Metra TTYO-01 is one there are others. I went and bypassed the JBL amp and used the Metra 70-8117. This harness requires you to run the speaker wires from the back of the new headunit to the output of the JBL amp. It also comes with a 20 pin connector for the power wires. For the NON-JBL you can use a normal 1987-up toyota harness.
     
To Top