1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

16" Tundra Wheels

Discussion in 'Wheels & Tires' started by teamhypoxia, Mar 19, 2013.

  1. Mar 19, 2013 at 6:24 PM
    #1
    teamhypoxia

    teamhypoxia [OP] MichelinMan

    Joined:
    Aug 21, 2012
    Member:
    #85247
    Messages:
    2,572
    Gender:
    Male
    Colorado
    Vehicle:
    '12 DCSB TRD OR
    I'm wondering if anyone knows about these wheels.

    I have a '12 TRD OR.
    Saw a set of these on craigslist for cheap and I'm wondering if they'll fit my truck.
    Also curious if anyone knows the backspacing of these wheels. IOW will they allow me to run 285s without a spacer?
    Any information would be appreciated.

    Thanks:)

    3G33L13J35Fb5M85Jcd3je541183abc351840.jpg
     
  2. Mar 19, 2013 at 6:37 PM
    #2
    mach1man001

    mach1man001 eh whatever

    Joined:
    Nov 4, 2009
    Member:
    #25415
    Messages:
    6,204
    Gender:
    Male
    First Name:
    Rob
    Blackstone, MA
    Vehicle:
    '09 Sport DC LB Met Grey
    Toyota bed mat (1st mod), Toyota all season floor mats, Rear spring TSB, Map light mod, Fog light mod, Putco yellow fog bulbs, Weather Tech window vents, Extra d-rings, Mounted mag light, TRD CAI with AFE pro dry filter, '05 front mud flaps (winter only), 2 set's of wheels/tires, 285/75/16 Duratrac's, Black Painted 1st Gen TRD wheels (wheeling set) Black powder coated FJ Cruiser with 265/70/17 Michelin AT2 tires (everyday), painted center of grill & bumper black, Devil horns, OME with 885's front, OME shocks w/OMD designed rear springs, Front diff drop, Rear trailer plug relocate, ATO IFS skid, Relentless Trans & Transfer skids, BAMF bolt on rock sliders, Relentless tailgate reinforcement, Uniden 75 CB radio, BAMF antenna bracket, TRD exhaust, high lift jack w/ATO mounts. And of course ProEFX Towing Mirrors!
    I have been looking for those exact wheels. To answer all your questions. Yes. They are a 16X7 wheel with about 4.75" backspacing. They have the same specs as my 1st gen wheels that I run my 285 Duratracs now but they just look nicer and you don't have trim nearly as much as you do with aftermarket 8" wide wheels with 4.50" backspacing. If they are a good deal I would say go for it.
     
  3. Mar 19, 2013 at 6:54 PM
    #3
    teamhypoxia

    teamhypoxia [OP] MichelinMan

    Joined:
    Aug 21, 2012
    Member:
    #85247
    Messages:
    2,572
    Gender:
    Male
    Colorado
    Vehicle:
    '12 DCSB TRD OR
    seller is asking $150 for all 4 with centercaps and lugnuts

    sounds reasonable to me... good deal?

    Oh and I seem to remember something about the OR having larger calipers and sometimes having trouble with some 16" wheels clearing?

    my stock wheels are 16" though so.....
     
  4. Mar 19, 2013 at 7:16 PM
    #4
    mach1man001

    mach1man001 eh whatever

    Joined:
    Nov 4, 2009
    Member:
    #25415
    Messages:
    6,204
    Gender:
    Male
    First Name:
    Rob
    Blackstone, MA
    Vehicle:
    '09 Sport DC LB Met Grey
    Toyota bed mat (1st mod), Toyota all season floor mats, Rear spring TSB, Map light mod, Fog light mod, Putco yellow fog bulbs, Weather Tech window vents, Extra d-rings, Mounted mag light, TRD CAI with AFE pro dry filter, '05 front mud flaps (winter only), 2 set's of wheels/tires, 285/75/16 Duratrac's, Black Painted 1st Gen TRD wheels (wheeling set) Black powder coated FJ Cruiser with 265/70/17 Michelin AT2 tires (everyday), painted center of grill & bumper black, Devil horns, OME with 885's front, OME shocks w/OMD designed rear springs, Front diff drop, Rear trailer plug relocate, ATO IFS skid, Relentless Trans & Transfer skids, BAMF bolt on rock sliders, Relentless tailgate reinforcement, Uniden 75 CB radio, BAMF antenna bracket, TRD exhaust, high lift jack w/ATO mounts. And of course ProEFX Towing Mirrors!
    $150 in good shape? Buy em! They will fit over your brake calipers. Great deal.
     
  5. Aug 17, 2013 at 6:35 PM
    #5
    KWMF

    KWMF B.S. Goodwrench

    Joined:
    Aug 8, 2012
    Member:
    #84332
    Messages:
    1,280
    Gender:
    Male
    First Name:
    Zack
    WNC
    Vehicle:
    2013 RC 4WD AT
    20% Tint, Factory Cruise, Delayed Wiper Switch, Factory Fogs, Hitch, Toyota OEM bed box,
    I may have found me a set of these for my 2012 RC 4x4,

    From my reading being a 1st Gen Tundra wheel it should have @ 4.75" back spacing, and my stock 16x7 steel wheels have @ 5.25" back spacing, or is it 5.5"

    They should widen my stance @ 1 inch at each wheel correct?
     
    Last edited: Aug 17, 2013
  6. Aug 18, 2013 at 11:35 AM
    #6
    Mr. Biscuits

    Mr. Biscuits Salesman by trade, Gentleman by habit

    Joined:
    May 6, 2012
    Member:
    #78316
    Messages:
    1,557
    Gender:
    Male
    First Name:
    Brennen J
    Bakersfield
    Vehicle:
    2000 PreRunner TRD V6
    -Bilstein 5100/ Eibach 3" lift -Custom 2" lift rear leaf pack -Crystal clear headlight housings -updated (01-04) rear tail lights -custom front tube bumper -custom rear tube bumper -Deckplate mod -Kenwood Headunit -Pioneer Speakers -black door handles -Debadged, rebadged black -Ultraguage
    Yes.

    Thank you for reviving a dead thread, but yes. They'll push out about an inch over stock.
     
  7. Aug 18, 2013 at 11:41 AM
    #7
    KWMF

    KWMF B.S. Goodwrench

    Joined:
    Aug 8, 2012
    Member:
    #84332
    Messages:
    1,280
    Gender:
    Male
    First Name:
    Zack
    WNC
    Vehicle:
    2013 RC 4WD AT
    20% Tint, Factory Cruise, Delayed Wiper Switch, Factory Fogs, Hitch, Toyota OEM bed box,
    Thanks,

    I'm actually on my way to go get them right now.

    Should I have started a new one?

    I thought it was always best to not start a new thread unless really needed,

    My bad if I was wrong,
     
  8. Aug 19, 2013 at 1:35 PM
    #8
    Yamaha Dave

    Yamaha Dave Well-Known Member

    Joined:
    Mar 27, 2010
    Member:
    #34080
    Messages:
    2,664
    Gender:
    Male
    Just post pics of said wheels installed on your truck and all will be forgiven.
     
  9. Aug 19, 2013 at 4:00 PM
    #9
    Mr. Biscuits

    Mr. Biscuits Salesman by trade, Gentleman by habit

    Joined:
    May 6, 2012
    Member:
    #78316
    Messages:
    1,557
    Gender:
    Male
    First Name:
    Brennen J
    Bakersfield
    Vehicle:
    2000 PreRunner TRD V6
    -Bilstein 5100/ Eibach 3" lift -Custom 2" lift rear leaf pack -Crystal clear headlight housings -updated (01-04) rear tail lights -custom front tube bumper -custom rear tube bumper -Deckplate mod -Kenwood Headunit -Pioneer Speakers -black door handles -Debadged, rebadged black -Ultraguage
    X2 those tundra wheels are a bit of a rarity. Sorta like 3rd gen 4runner 5 spokes. And I love em both
     
  10. Aug 19, 2013 at 4:05 PM
    #10
    KWMF

    KWMF B.S. Goodwrench

    Joined:
    Aug 8, 2012
    Member:
    #84332
    Messages:
    1,280
    Gender:
    Male
    First Name:
    Zack
    WNC
    Vehicle:
    2013 RC 4WD AT
    20% Tint, Factory Cruise, Delayed Wiper Switch, Factory Fogs, Hitch, Toyota OEM bed box,
    And the thing is I had found a set of the 4runner ones but felt the spokes were to thick for a regular cab, lol...

    And they were only 200 bucks,

    I really hope these look s good as I think they will!

    Now comes the fun part of choosing the tires!
     
  11. Aug 19, 2013 at 6:51 PM
    #11
    KWMF

    KWMF B.S. Goodwrench

    Joined:
    Aug 8, 2012
    Member:
    #84332
    Messages:
    1,280
    Gender:
    Male
    First Name:
    Zack
    WNC
    Vehicle:
    2013 RC 4WD AT
    20% Tint, Factory Cruise, Delayed Wiper Switch, Factory Fogs, Hitch, Toyota OEM bed box,
    Picked em up with worn out tires,

    [​IMG]


    Spent a few hours cleaning them up after a local gas station only charged me 20 bucks to remove the rubber for me, I figured the old TPM Sensors are shot, I don't want them in there anyway, so out they came,

    [​IMG]


    You get the look I am going for here, and with the added offset I am really thinking they will look great and original.
    I haven't seen but one other Tacoma with these wheels on them,

    I really don't think they deserve to be mounted to my stock Dunlops, :(
    I am really leaning towards a set of Cooper Discoverers in 265/75/R16, :D

    [​IMG]
     
    Last edited: Aug 20, 2013
  12. Aug 19, 2013 at 7:50 PM
    #12
    teamhypoxia

    teamhypoxia [OP] MichelinMan

    Joined:
    Aug 21, 2012
    Member:
    #85247
    Messages:
    2,572
    Gender:
    Male
    Colorado
    Vehicle:
    '12 DCSB TRD OR
    Those are going to look sharp!

    I never did end up getting the one's I was looking at.

    The guy got a bunch of calls and tried to start a bidding war so I told him to pound sand.

    I did end up with a set of aftermarket wheels with a good offset though, so it's all good.
     
  13. Aug 20, 2013 at 2:54 AM
    #13
    Yamaha Dave

    Yamaha Dave Well-Known Member

    Joined:
    Mar 27, 2010
    Member:
    #34080
    Messages:
    2,664
    Gender:
    Male
    Those do look great and would look even better mounted on some Hankook Dynapros or Cooper tires
     
  14. Aug 20, 2013 at 8:06 AM
    #14
    mach1man001

    mach1man001 eh whatever

    Joined:
    Nov 4, 2009
    Member:
    #25415
    Messages:
    6,204
    Gender:
    Male
    First Name:
    Rob
    Blackstone, MA
    Vehicle:
    '09 Sport DC LB Met Grey
    Toyota bed mat (1st mod), Toyota all season floor mats, Rear spring TSB, Map light mod, Fog light mod, Putco yellow fog bulbs, Weather Tech window vents, Extra d-rings, Mounted mag light, TRD CAI with AFE pro dry filter, '05 front mud flaps (winter only), 2 set's of wheels/tires, 285/75/16 Duratrac's, Black Painted 1st Gen TRD wheels (wheeling set) Black powder coated FJ Cruiser with 265/70/17 Michelin AT2 tires (everyday), painted center of grill & bumper black, Devil horns, OME with 885's front, OME shocks w/OMD designed rear springs, Front diff drop, Rear trailer plug relocate, ATO IFS skid, Relentless Trans & Transfer skids, BAMF bolt on rock sliders, Relentless tailgate reinforcement, Uniden 75 CB radio, BAMF antenna bracket, TRD exhaust, high lift jack w/ATO mounts. And of course ProEFX Towing Mirrors!
    Put these coopers on it.

    [​IMG]
     
  15. Aug 20, 2013 at 8:24 AM
    #15
    KWMF

    KWMF B.S. Goodwrench

    Joined:
    Aug 8, 2012
    Member:
    #84332
    Messages:
    1,280
    Gender:
    Male
    First Name:
    Zack
    WNC
    Vehicle:
    2013 RC 4WD AT
    20% Tint, Factory Cruise, Delayed Wiper Switch, Factory Fogs, Hitch, Toyota OEM bed box,
    I may, however I just got a quote from a place close to my work that has the
    P version of the Cooper Discoverer AT, mounted and balanced for four is 593.13,

     
  16. Aug 22, 2013 at 10:47 AM
    #16
    Hawaiian05

    Hawaiian05 Well-Known Member

    Joined:
    Aug 3, 2012
    Member:
    #84019
    Messages:
    321
    Gender:
    Male
    First Name:
    Tony
    Boise, ID/ Hawaii
    Vehicle:
    2006 4Runner Sport/ 04 TRD DoubleCab 4wd-Sold
    Bilstein 5100's/ OME 881's/ Toytec AAL/ Toytec Diff Drop/ TRD Tundra Wheels/ Duratracs/ Hayden 678 Trans Cooler/ Rear Diff Breather Extension/ ScanGuage2/ Wet Okoles
    Subscribing to this thread! I recently picked up a set on cragies for $100, but have not mounted yet. I'm anxious to see what yours will look like once mounted up!

    I've only been able to find 1 pic of them mounted on a tacoma...

    IMG_7351.jpg
     
  17. Aug 22, 2013 at 11:13 AM
    #17
    KWMF

    KWMF B.S. Goodwrench

    Joined:
    Aug 8, 2012
    Member:
    #84332
    Messages:
    1,280
    Gender:
    Male
    First Name:
    Zack
    WNC
    Vehicle:
    2013 RC 4WD AT
    20% Tint, Factory Cruise, Delayed Wiper Switch, Factory Fogs, Hitch, Toyota OEM bed box,
    And that is a Gen-1, I have always liked the wheel,
    I thing the spokes compliment the truck, and funny thing is with the new edges and angles of the front grille on the 2013-2014 models the spokes have a triangle type shape one the ends, it's subtle but i really hope it turns out well.

    I am SO ready to get these on my truck but am going to wait for one more paycheck,

    I found the Cooper AT tires I want at Discount for barely over 600 M&B,

    However I can get the AT3 for about that also, I am very curious why Discount Tire doesn't have the AT3.

     
  18. Aug 23, 2013 at 8:33 AM
    #18
    Hawaiian05

    Hawaiian05 Well-Known Member

    Joined:
    Aug 3, 2012
    Member:
    #84019
    Messages:
    321
    Gender:
    Male
    First Name:
    Tony
    Boise, ID/ Hawaii
    Vehicle:
    2006 4Runner Sport/ 04 TRD DoubleCab 4wd-Sold
    Bilstein 5100's/ OME 881's/ Toytec AAL/ Toytec Diff Drop/ TRD Tundra Wheels/ Duratracs/ Hayden 678 Trans Cooler/ Rear Diff Breather Extension/ ScanGuage2/ Wet Okoles
    Yes, unfortunately I haven't been able to find any pics of this wheel on a second gen, only 1st gen and some 4runners.

    I think the design will definitely compliment your truck! Plus, I absolutely love the newest face lift that the 2nd gens received.

    Be sure to post a pic once they're on! Im in the same boat as you with waiting for tires...
     
  19. Aug 23, 2013 at 8:39 AM
    #19
    KWMF

    KWMF B.S. Goodwrench

    Joined:
    Aug 8, 2012
    Member:
    #84332
    Messages:
    1,280
    Gender:
    Male
    First Name:
    Zack
    WNC
    Vehicle:
    2013 RC 4WD AT
    20% Tint, Factory Cruise, Delayed Wiper Switch, Factory Fogs, Hitch, Toyota OEM bed box,
    Oh I will, I have some pictures also to show the offset difference,

    I called yesterday and the guys at DT, (Discount Tire) were telling me they have their own Cooper Discoverer ATP, he reported to many complaints from the A/T3??? The reason I had called was that they didn't have the A/T3 on their site, i was curious why?

    He wants me to come by and they might be able to give me a few bucks off if I have decent tread on my tires, lol...

    I am glad they really want to sell me a set of tires.

    If anyone can shed some light on the A/T3 versus Discount Tires ATP I am all ears....

    In the SUV not LT size of 265/75/R16
     
    Last edited: Aug 23, 2013
  20. Aug 24, 2013 at 5:51 AM
    #20
    mach1man001

    mach1man001 eh whatever

    Joined:
    Nov 4, 2009
    Member:
    #25415
    Messages:
    6,204
    Gender:
    Male
    First Name:
    Rob
    Blackstone, MA
    Vehicle:
    '09 Sport DC LB Met Grey
    Toyota bed mat (1st mod), Toyota all season floor mats, Rear spring TSB, Map light mod, Fog light mod, Putco yellow fog bulbs, Weather Tech window vents, Extra d-rings, Mounted mag light, TRD CAI with AFE pro dry filter, '05 front mud flaps (winter only), 2 set's of wheels/tires, 285/75/16 Duratrac's, Black Painted 1st Gen TRD wheels (wheeling set) Black powder coated FJ Cruiser with 265/70/17 Michelin AT2 tires (everyday), painted center of grill & bumper black, Devil horns, OME with 885's front, OME shocks w/OMD designed rear springs, Front diff drop, Rear trailer plug relocate, ATO IFS skid, Relentless Trans & Transfer skids, BAMF bolt on rock sliders, Relentless tailgate reinforcement, Uniden 75 CB radio, BAMF antenna bracket, TRD exhaust, high lift jack w/ATO mounts. And of course ProEFX Towing Mirrors!

    I really don't know the differences but I know someone who had and loved the Cooper ATR but got a warranty because of dry rot so they gave him a set of AT3's and he hated them. He said they wandered all over the road. He even had his alignment checked twice. GL and maybe check out the Toyo AT2's
     
To Top