1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

1997 3RZ Bell Housing to Engine Bolts

Discussion in '1st Gen. Tacomas (1995-2004)' started by Steeprock, Apr 15, 2024.

  1. Apr 15, 2024 at 12:39 PM
    #1
    Steeprock

    Steeprock [OP] Well-Known Member

    Joined:
    Jan 1, 2020
    Member:
    #314825
    Messages:
    93
    Gender:
    Male
    Vehicle:
    1997 Regular Cab 4wd Tacoma
    I am putting my rebuilt engine back in and one of the first steps is to bolt the 4 A340F (auto) bell housing bolts back to the engine. Of the 4 bolts I took off one was slightly longer (maybe 5-10MM) than the other and had two washers on it. Doing a parts search on yoshiparts.com shows 3 bolts, part #91619-61255 (also shows 90080-11423 as an alternate part #). The other part #, for the 4th bolt is 91659-61260 (alternate part # 90080-11425). This bolt is shown as the lower drivers side bolt. When I pulled the engine this "longer bolt" was on the top passenger side. I had a friend rebuild the transmission ten years ago, so it possible he got these mixed up. Can someone help confirm that this longer bolt belongs on the bottom drivers side?

    Capture.png
     

Products Discussed in

To Top