1st gen floor mats

Did you see if they actually fit first???

I never trust the pictures they use because those are almost always generic pics. Go see if they fit your truck before returning them.

 

I did.. Driver side is too big. Must be for a larger truck.

 

True but the owner set the record for the most money paid for an automobile (70M) so he sure ain't sweatin' the leftover 1st Gen market.

 

Weathertech added digital fit liners for 01-04 last year sometime. My buddy had just picked up an 04 double cab and mentioned he grabbed weathertechs.

Looks like they are for automatics only though:
https://www.weathertech.com/toyota/...ission/automatic/tacoma-cab-style/double-cab/

 

IIRC, the double cabs never came in a manual transmission, so this makes sense.

 

Just curious, do you have a set of these? Would like to know how they hold up. Thanks!

 

That oak tan color looks hideous there. And the black Husky mats will look bad too. You want the gray Husky ones only. On floor mats it is acceptable to not use OEM

 

Yeah, pretty sure weathertech updated them just for the doublecabs since the trans tunnel is a bit wider, iirc. The fronts have always been available for xtracabs I thought though. They are at least available for standard/xtracab for 01-04.

 

I have the universal Weather Tech floor mats in oak color in my truck. I had to trim a small piece of the floor mat to fit near the clutch pedal. I use the hook attachment to the OEM carpet and am happy with the fit of my universal Weather Tech floor mats. It catches all the dirt/debris, can be vacuumed/scrubbed clean/rinsed/dried. Mine has developed a hole near the gas pedal due to me resting my heel on the floor before stepping on the gas pedal. I'll have to patch it up with something. Any suggestions to fix the wear on my floor mat?

 

What the hell is different with the floormat design for the auto vs manual?

 

I know! i thought i would give it a shot with this color as the blue gray replacement one i wanted are out of stock at Camelback
just wanted something for my weary feet on the road under cruise control
husky mats i am looking into


those tan mats are not even pure OEM quality!!!

 

I bought grey husky liners for my 02 double cab. I hated how the grey clashed. It's a completely different shade of grey (even though there's a few different shades in the truck already.)

I ended up sending them back to Husky and swapping for black. Love them though.

 

Mine fit perfectly with no trimming necessary.

 

When did you buy them? As of a year or two ago, you'd need to cut the corners off them to get them to fit. They also didn't have rears for 1st gen double cabs, but they do now.

 

https://www.tacomaworld.com/threads/floor-mats.633369/page-2#post-21777471

 

Until they redesigned them last year, they wouldn't fit doublecabs though. Here's why:
https://www.tacomaworld.com/threads/weathertech-floormats-on-1st-gen.195957/page-3#post-7500457

 

I was planning on going with the grey Huskys until I saw complaints about the color discrepancy. I believe someone called it more blue than grey. This stuck in my brainspace and I thought the better of it. (Black truck, grey interior) Ended up ordering the black Husky hd mats. Im keeping my fingers crossed that I made the right decision.

 

There's plenty of black in our interior so it blends in fine. Much better than the grey. Once i got the black replacement mats in i was completely satisfied.

 

That is reassuring. I hope it works out that way for me too.

 

they didn't HAVE ones for DC until last year, these were only for single/xtra cabs. also no manual in DC so I was just replying to @ThunderOne