2000 4WD front bumper

Hiya, I have a 2000 4WD Tacoma here in Arizona. I don't need a full front bumper, but the black plastic holding the turn signals is toast and needs replacement. I see I can get the parts, but does anyone know of a video I can watch to help replace it? I currently have the bits that are left gorilla taped on. Help? Oh, of course the dealer wants to replace the entire bumper and I'm 99% certain it doesn't require that.

 

Welcome to TW!
Some pics might help. Absent that, you can start here (https://autoparts.toyota.com/search...model_year=2000&model_year_code=2000:7554&p=4 ) for parts diagrams and look for the specific parts that are broken. Most components in the stock bumper are pretty straightforward to remove/replace. Good luck!

 

Can you post a pic of the piece you need to replace? It’s been a while since I had a factory bumper but seem to remember the turn signals bolting in to a pretty big piece of trim.

Here is a good video for the entire bumper, but they show taking off the individual pieces. If you are replacing the big plastic trim just yank it off and swap it and lights like they do here.
https://m.youtube.com/watch?v=3JMvA-d70p8

 

Just lay on your back under the bumper look straight up you will see eight or ten bolts remove them and it will come right off easy as pie. When installing the new one pay close attention to the two lineup tabs that snap into the center portion of the bumper.