2000 Tacoma 2.5 Bilistein Lift with 18x10 -24 offset will 33 Fit????

I have a 2000 Single cab Tacoma with a 2.5 Inch Coilover lift with Bilistein shocks all the way around I am currently running 32.5x11 federal MT with 18x10 Moto Metal rims with -24 offset I am wanting to run 33x12.5 and wanted to know if they would fit.Thanks

 

bump

 

With some small mods like trimming or pinch weld hammering i would think they should fit, but unsure as i can't begin to think of a reason for 18inch rims on a tacoma.

 

Yeah 2stroke is right, there will prolly be some rubbing. To make it work you'll need to do some cutting and bashing to get em to fit. The pinchweld will be your biggest culprit. Depending on the rim you might end up with a lil rubbing on the frame too. Cant say fur sure if that'll be true or not, but you'll definitely rub the back of the fender.

After looking at your stance frame rubbing prolly wont be an issue. But with that said a 10" wide rim is pretty big and ive never run anything over 8" on mine.

 

^^ what he said.
Also consider the inside top of the tire making contact with the UCA.

Good luck.

 

I Preciate the helps thanks