2002 6 Lug Sway bar refresh part list request

Looking for a parts list for refreshing my sway bar set up on my 2002 TRD 4WD Tacoma. Need the brackets, bushings, end links, sway bar and probably any associated bolts/nuts.

Stabilizer Bar Bracket Left and Right. Is there a difference between the two sides? Does it come with bolts?
48829-35070
48824-35100

Stabilizer Bar Bracket Bushings (2)
48815-35090

Stabilizer Bar
48811-04110

Stabilizer End Links. Part picture of the left side link (48810-35020) is of the old style but mcgeorge says its the right part. Not sure I have the right part number.
48820-35040
48810-35020

Anything else?

 

Those all sound right, same as my '03. Curious why you need to replace the bar, they're pretty stout.

I didn't notice any difference, but maybe there is. I doubt it comes with bolts.

If you're going full replace, I'd swap out the link cushions/retainers too, and it doesn't look like the links come with nuts.

https://parts.ourismantoyotaofrichm...gas/suspension--stabilizer-bar-and-components

 

I might not replace the sway bar. It is just pretty rusty at the brackets/bushings so might be worth doing.

See I think that I don't have the cushions/retainers. My end links should look something like the image shown. That's why I am a bit confused as to exactly what all parts I need because most places seem to show pictures of the 95-00 style. Also shared a picture of what mine look like on my truck (shitty angle).

 

Just be aware there were several different size sway bars used (I think 3 different diameters) measure the outer diameter to be 100% sure.

It sucks to get the wrong size bushings and parts.

unless your going to replace all the parts .