2004 Power window switch pin out

Does anyone have a pinout of the the master power switch on the driver door for a tacoma with power windows and power door locks? Even a picture of the wires going into the connector would work for me. As long as the truck has power windows and locks. I installed 2004 door panels on my 2000 truck. The pinout of the master switch is slightly different and I am trying to figure out how to make it work. I have 8 wires and 8 pins on the switch.

Thanks for any help.

 

Morning bump

 

This is from a 2002 but it should be pretty much the same. Keep in mind sometime Toyota liked to change wire colors for certain years.

 

@BartMaster1234 has done this check his build page for all the info.

 

Here's 2003 it will be the same.

 

Heya, I used 2004 Double Cab Limited door wiring and components in my '98. The wiring should be about the same besides the unused rear door wiring, the speaker/tweeter wiring, and the door check wiring. If you don't want to have 3 connectors (2 new connectors, 1 existing speaker connector) you can re-pin one of the new connectors with the speaker wiring.

https://www.tacomaworld.com/threads...ofit-conversion-build-thread-write-up.455447/

 

Thanks for the help guys. I got it figured out. Removed the pins fro, the connector and moved them to the correct locations. Everything works perfect now.