1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

2008 Taco Crew Cab - ABS Light intermittent

Discussion in '2nd Gen. Tacomas (2005-2015)' started by oldman_58, Jul 24, 2016.

  1. Jul 24, 2016 at 3:20 PM
    #1
    oldman_58

    oldman_58 [OP] Member

    Joined:
    May 31, 2016
    Member:
    #188351
    Messages:
    10
    Gender:
    Male
    The ABS light was coming on after 1/4 to 1/2 mile of driving, I changed all the Wheel sensors and the ABS light continues to be lit, no Codes are showing in the ECU.

    Not sure what part of the ABS pump/ assembly might case this issue, If I need to change the ABS Pump assembly, where can I purchase new or rebuilt that does not cost an arm or leg.
     
  2. Jul 26, 2016 at 12:33 PM
    #2
    oldman_58

    oldman_58 [OP] Member

    Joined:
    May 31, 2016
    Member:
    #188351
    Messages:
    10
    Gender:
    Male
    Well here is the answer:

    I had replaced the Brake lights on the cab with 3 LED bulbs a few days before the problem started... After a few times of pressing the brake all the brake light to flicker, seems to be feedback from the LEDS.

    At any rate I removed the LEDS and replaced with standard bulbs (192) and the problem is gone.

    It cost me $70.00 at a Toyota dealership to check for codes and find the problem, they took 4 hours to track down the issue. Money well spent. The Tech and the service writer were on top of this issue. If your in the Central Florida area David Maus Toyota in Sanford really did an outstanding job!!!!
     

Products Discussed in

To Top