2008 tacoma access cab getting OME lift

I Have a 2008 tacoma access cab that was in an accident and I bought it back from salvage. It got a flatbed put on it to replace the damaged bed.

I have ordered an OME lift from toytek.
I went with the
90021 shocks with the 884 coils and top plate spacers
in the back I got the Dakar leaf pack I also ordered the HD extra leaf for it( I am not sure of weight of bed.
I also got the SPC UCAs for it to get alignment in spec.

I will be adding a MOB town front recovery bar and MOB town bolt on rock sliders. I am starting to worry that I should have gone with 90000 and 885 or 90021 and 885 coils.

Also I am not sure I will need the HD leaf in the back or just standard leaf pack. I will be carrying a Hi-lift and probably a Joboxx on the bed all the time

getting 285-75-17 on 17X9 -12mm rims.

I am pretty sure I am going to need to trim the bed to make the tires fit with the lift.

I will post pics, just wondering what everyones experience has been in a similar set up. Thanks

 

top picture is clearance on the bed currently
next two are both sides with the front tire lifted about 18" in the air with a fork lift to "flex"
last to pics are as it sits before tires and suspension
feel free to make fun of truck or OP thanks

 

Super sick