1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

2009 Access Cab and weather techs?

Discussion in '2nd Gen. Tacomas (2005-2015)' started by BSP4x4, Nov 17, 2009.

  1. Nov 17, 2009 at 8:32 AM

    BSP4x4 [OP] Guest

    For all of you who have a 2009 AC (Manual) do the front and back weather tech's fit the 2009. I know you have to trim the drivers side to fit the clutch. What about the back set up mats getting in the way of the rear console? I thought the website says they don't fit models with a rear console.
  2. Nov 17, 2009 at 8:40 AM

    BSP4x4 [OP] Guest


    Will not fit trucks with vinyl floors.
    WeatherTech® Rear FloorLiner™
    Rear liner will not fit with optional center storage box/console.

    ^From the website
  3. Nov 17, 2009 at 9:36 AM

    BSP4x4 [OP] Guest

  4. Nov 17, 2009 at 9:56 AM

    jassco Well-Known Member

    Aug 3, 2009
    2010 Access Cab 2.7L SR5 5spd, 4x4
    5100 set to .85 w/ rear TSB, 2012 Rear-view Mirror, Grillecraft, Team Trails FJ Wheels, TPMS canister, Rear headrest delete, Rear console delete, Valley Hitch, Frame undercoat, $2.99 Tailgate hose clamp lock, Avid light bar, 4x4 lighted switch ala Biceman.
    It fits only if you unbolt the rear console, place mat there and then put console back over the mat. You can also trim if needed. I removed rear console so this wasn't an issue.
    I will check again when i get home but if there are mounts there(can't recall) you can easily drill holes for the bolts into the mat.

    It looks like you can partially bolt the console in without drilling the liner.
To Top