2010 DCLB Back to Factory Sale (All gone!)

I am upgrading my 2010 Tacoma SR5 TRD for a 2016 SR5 TRD Sport and some of the items I installed in the truck are not compatible with the newer model. My loss is your gain as I have several items for sale as part of my ‘back to factory’ sale.

Here is a list of what I am selling. You can find more information and photos below:

• Running boards for double cab [SOLD on March 5]
• StealthTaco Satoshi Mesh Grille [SOLD on March 3]
• Toyota Tundra bed rail cleats [SOLD on March 3]
• Alpine double din head unit, dash kit, wiring harness (from Crutchfield) [SOLD on Feb. 29]
• Wet Okole seat covers (front and back) [SOLD on Feb. 28]
• Salex Center Console/Glove Box Organizer [SOLD on Feb. 28]
• ProClip iPhone 5/5s/6/6s mount [SOLD on Feb. 28]

I am located in Edmonton (Alberta) and would be great if I could sell locally, otherwise I am fine with shipping within Canada. I will ship by method of your choice, you pay the shipping. Some of the items are irregular shaped or heavier so that could add some complexity but if you want it I’ll get it to you. If you’re from the States there may be duty/taxes on shipments across border so this could affect cost too.

If you are interested in what you see send me a PM or reply in here and I will answer any questions you have.

All photos are from the Media section of my profile page (https://www.tacomaworld.com/members/gursky.148796/) so take a look through the album for more detailed photos.

** EVERYTHING HAS BEEN SOLD, NO MORE ITEMS REMAIN **

Running boards for double cab [SOLD on March 5]

The running boards were from a 2015 Tacoma Trail Teams edition. They run the length of the double cab and are all black. They are aluminum (pretty certain) and the step parts are plastic.

They sit fairly close so the bottom of the truck so they allow for a bit of clearance underneath and protect from door dings or other parking lot ailments but allow for a nice step to get in to the truck. There are six bolts required for each running board and they connect to the factory drilled holes in the frame (these holes may be covered with a plastic insert). I have all of the mounting bolts plus I bought a few extras from Home Depot.

I bought them from a local seller who never used them on their truck for $300 CAD and I will sell them for $150 CAD. Due to the size and weight these would be best sold locally.

I don't have any photos of the boards installed on my truck, but here are the photos of them uninstalled.




StealthTaco Satoshi Mesh Grille [SOLD on March 3]

In April 2015 StealthTaco, of http://www.ecgfabrication.com, did a Group Buy. I got in on the order with a Colormatched Mesh Grille (in Super White II) and the mesh was set to thin depth. The mesh was perforated and powder coated flat black. The triangles in the corners were also done too. The grille comes with raptor style “TOYOTA” lettering in black (this was not a part of my original order, so this was a $70USD freebie).

This was used on my 2010 Tacoma but it should fit models from 2005 through to 2011.

In April I paid $310USD (when it should have been $380USD because of the lettering) and it was installed in June. It was installed on the truck for nine months. In that time I drove roughly 4700KM. I will sell this for $275 CAD.

Additional photos of the grille installed on the truck are here: https://www.tacomaworld.com/threads...oup-buy-ends-4-18.369259/page-9#post-10383964.




Toyota Tundra bed rail cleats [SOLD on March 3]

Similar to the plastic Tacoma bed rail cleats these Tundra cleats are aluminum and have a higher weight tolerance (220 pounds) than the plastic Tacoma ones.



I bought these from a local seller and will sell the pair for $20CAD.

Alpine double din head unit, dash kit, wiring harness [SOLD on Feb. 29]

From Crutchfield I ordered the Alpine CDE-W235BT receiver. I wanted more power to my speakers and improved Bluetooth capability, which this device did wonderfully.



The head unit was installed using the Dash Kit and wiring interface, which were:

- Scosche TA2053S9B Dash Kit (Grey) (Part #142TA2053B), was used to install the receiver in to the console.



- Crux SWRTY-61S Wiring Interface (Part #249TY61S), was used to control the audio with the steering wheel , this wiring interface works with specific head units (Alpine, Pioneer, Clarion for instance) and vehicles so double check that this will work if you don’t receive it with the Alpine unit (there is a photo showing what application the device can be used in).



This was ordered in March 2015 for $250CAD and was in the truck for 12 months. If you take the Alpine receiver I will include the Dash kit and Wiring interface for free, otherwise I can sell these individually. I will sell this for $125CAD.

Wet Okole seat covers (front and back, Sport buckets, 60/40 rears, black with charcoal) [SOLD on Feb. 28]

My 2010 TRD Double Cab had Wet Okole seat covers in the front and the back. The covers fit great, looked fantastic and gave the interior a fresh new look.

The front seats have the TRD logo in black on them and the seats are black with charcoal. My truck seats were Sport buckets with adjustable headrests, side airbag and no tray. Both seats have OEM style pockets on the back. When installing the covers I tore the front head rest cover and Wet Okole sent me a replacement, I will include the torn head rest cover just in case you can repurpose it (the tear was on the bottom of the headrest where the Velcro attaches, so you could install it and not notice the damage).

I confirmed with Wet Okole that these covers will fit on TRD models from 2009-2015 with front bucket Sport seats.

My rear seat covers were 40/60 split with three adjustable head rest. Wet Okole confirmed that these will fit 2005-2011 double cab vehicles.

I also have the console cover in black, and unused bottles of the seat cover care kit (wet suit shampoo, seat cover UT protectant and MiraZyme Odor Eliminator, details of this kit are here http://www.wetokole.com/CKIT.html).

I ordered them in March 2015 as part of a TacomaWorld Group Buy and they were installed in April 2015. These were in the vehicle for 11 months. In that time I drove roughly 5500KM’s. When not being driven the truck was stored in a garage so there should be no discoloration or fading on the seats. There was no smoking or animals/pets in the vehicle either. Most of the times all but the driver seat was unoccupied, so these should look as fresh as the day I bought them.

I paid $543.60USD for the entire kit ($254.40USD for the front, $219.20USD for the rear and $70USD for shipping). I will sell this entire set for $475CAD.

Additional photos of my installation in the truck are here: https://www.tacomaworld.com/threads...-19feb15-08mar15.363871/page-16#post-10137795.

Fronts:


Rears:


Accessories:


Salex Center Console/Glove Box Organizer [SOLD on Feb. 28]

They may look like pieces of plastic but they are a great way to organize the open space that is the Tacoma’s console and center console. These items managed to keep everything organized and allowed me to keep my sanity when I need to look for a pencil or a cable in my console. This is Item #SLX102, which is a Tacoma Organizers ('05-'13) - Combo Set. I used it in my 2010 Tacoma but it will work in the 2005 through to 2013’s.



I bought July 2014 and paid $48USD. I will sell this for $20CAD.

ProClip iPhone 5/5s/6/6s mount [SOLD on Feb. 28]

I had a ProClip Console Mount (compatible with 2005-2015 Tacoma’s) and an adjustable holder for small to medium iPhone 5/5s. I upgraded to an iPhone 6s with a TPU case on it and it fit in the holder fine. I paid $85USD for this ($65USD for material and $20USD for shipping) in October 2014 and it was installed in the truck through to February 2016. I will sell the mount and holder for $25CAD.

 

PM sent

 

If the phone mount will fit a galaxy s5, I'll take it. It should I think, if it fit an iPhone 6...

 

I think so. My wife has a S6 but don't have the chance to compare it beside my 6s. Case thickness makes a difference too, something like an Otterbox probably wouldn't work but a thinner TPU one should be fine. I would think the S5 would work but maybe take a look at your phones width just to make sure.

The ProClip website (http://www.proclipusa.com/phone-hol...r-for-small-to-medium-cases-511428-19369.cmsv) says:

I don't want to send you something that won't fit so double check the width, but for now you have dibs on the ProClip mount and holder.

 

Just measured my phone with case and it's 77.05mm wide and 12.4mm thick. I want to think the thickness isn't a big deal, but its tough to say.

 

Measured the ProClip mount and the arms on either side would be taller than a 12mm thick device. You can see in the attached photo where your phone would sit, but a thicker case could have fit issues and may have some wiggle room. It may be fine but I don't want to sell you something that won't be a good fit.

Even the largest ProClip mount for S5's have a max thickness of 10mm - http://www.proclipusa.com/phone-hol...with-a-case-246827-19619.cmsv?p_leftorright=0.

 

Replied and may be closing this deal off pending shipping information when I get to a UPS store Monday evening.

 

I guess I'll pass, then. Thanks for taking the time to measure it out. I love that style of mount, but I can't afford to gamble on fitment.

 

Fair enough, thanks for getting back to me on this.

I guess we know that for those interested in the ProClip mount, it may work but unless you have an iPhone 5 or 6 the fit may not be optimum.

 

The fitment would be fine with my phone if I decided to kaibosh the case, but in my line of work, caseless phones kick it in a matter of months.

 

Pmd

 

I bought console and glove box organizer yesterday on Amazon... where were you when I did that huh?! You can't predict the future or somethin?

 

PM replied to; will try and take care of the sale in person.

 

DOH! I've been been there before. Although I'm sure Salex appreciates our bad timing. Enjoy the organizer.

 

Interested in Alpine- shipping to US?

 

I'm sure we could work something out. I was looking at rates for another member and the Alpine has its own box so that will make creating a shipping estimate easier.

Are you interested in the Scosche TA2053S9B Dash Kit and

$64 Crux SWRTY-61S Install New CAR Stereo in Select 2003-2013 Toyota Vehicles Toy

Crux SWRTY-61S Wiring Interface too? They fit nicely in the Alpine box too.

I can get some shipping quotes from UPS and FedEx, what is your zip code?

 

PM sent

 

All items that were originally posted have been sold (Satoshi Mesh Grille, Tundra cleats, Alpine head unit, dash kit, wiring harness, Wet Okole covers, Salex organizer and ProClip mount) and I have updated the first post as such.

I did add one new item to the fire sale, and that was running boards that were from the 2015 Trail Team edition TRD. I won't be using them on my current truck so they are no good to me. Photos and details of the running boards are in the first post.

 

Running boards have been sold, there are no more items left from my 2010 DCLB to sell.

 

Thanks for the great deal, ecpxcellent shipping and transaction!