1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

2010 electrical gremlin??

Discussion in '2nd Gen. Tacomas (2005-2015)' started by Sprink669, Jun 3, 2011.

  1. Jun 3, 2011 at 6:41 PM

    Sprink669 [OP] Well-Known Member

    Jan 31, 2010
    I have a ARB bumper with just the regular light kit not the fog lights. I tapped into my harness as described and soldered them together and put electrical tape on the wires and back into the wiring harness. My problem is I have the right and left side running lights and the marker lights in the ARB turn on and off at random. I could be sitting at a light and looking at the reflection in the car in front of me and one side of my lights would turn off. I can get them to come back on by turning my lights on and off and it will restore the lights? Anyone have any suggestions? I did go back to the harness and make sure that the connections were solid and there was not any sigh of bare wires. THanks
  2. Jun 3, 2011 at 6:46 PM

    shane100700 Look'n like a fool with your pants on the ground..

    Jun 1, 2011
    Fort Dix, NJ (MT born and raised)
    08 Off Road, DC
    Kenwood 6140 w/nav/BlueTooth/backup cam/ Focal Components/ Alpine PDX-5/ JL 10", rear storage lock mod, tint, Snug Top xtra vision, OEM running boards, XD Spy 18x9, Nitto Terra Gripper AT's, AFE pro dry, Ultra Gauge
    I would assume there is a short somewhere, either in the ground, switch, or power. Everyone here is fast to reply with lots of experience, I'm sure they can help ya nail the issue down.
To Top