2010 OR ATRAC VSC cluster lights not working

After almost 2 years I made time to figure out how all these traction control buttons worked. 4lo had no ATRAC, 2hi quick push of VSC button, AUTO LSD illuminated no VSC OFF. Press and hold VSC no VSC OFF light. Just before buying an ABS controller, I had the thought maybe the lights are out and these modes function. I had been using AUTO LSD and rear locker, so I knew those worked. Got on an icy incline 4lo throttle wheels spin, push ATRAC throttle got some major ABS activation, also with rear locker on.
Also; I did Croms ABS VSC kill switch, works as described, except no VSC OFF light.
Unfortunately, it looks like these are not serviceable bulbs , soldered in LEDs. That sucks!
Questions;
Replace cluster
Replace board
Have board repaired
Other suggestions other than, ignore it!

 

Bump!

 

After reading many of David K's posts, I'm certain all 9 of the drive modes are functioning correctly. So now it's a matter of ABS module not commanding the ATRAC and VSC OFF lights on, wiring, or cluster issue.

Can anyone confirm that all the instrument cluster lights are LEDs? The wiring diagram I looked at clearly shows, all LEDs in the cluster.

Has anyone had issues with and or the cluster circuit board ?

We had 4"- 5" of snow last night so I had the opportunity to slide around some without getting beeped and flashed at!