2011 Tacoma - Overland Build

This is my 2011 Tacoma Overland build.

UPDATED:



Original Post:

-More Photos-​

Build so far:

Tepui Kukenam Ruggedized Roof Top Tent (Green)

Safari Snorkel

ARB Differential Breathers

ARB Air Compressor

ARB Air Locker (Front)

Toyota OEM E-Locker (Rear)

Yukon 4:56 Gears

Goodyear Duratracs 285/75r16

Icon Stage 7 Suspension Kit w/ Billet UCA & 700lb Springs

Icon Rear Hydraulic Air Bump Stop System

Icon U-Bolt Flip Striker Plates

Icon Lower Control Arm Skid Plates

Deaver Custom Leaf Pack

ARB Deluxe Bar

WARN M8000 Winch

CBI Trailer Rider 2.0

CBI Skid Plates - Full

CBI Rock Sliders

RCI Metal Works Gas Tank Skid Plate

RCI Metal Works Rear Differential Skid Plate

GOBI Ranger Roof Rack

GOBI Axe & Shovel Mount

Prinsu Camper Rack

sPOD Source

2x ARB Intensity 9.5" LED Lights - Flood (On Front Bumper)

4x ARB Intensity 7.25" LED Lights - Spot (On Roof Rack)

TRD Cold Air Intake

TRD Exhaust

Uniden Pro 520xl CB Radio w/ Firestik Antenna

LEER 100xr Shell

Bird Dawg Tech Deck

RAM Tablet Mount

Nvidia Shield Android Tablet

 

Nice Build! What is the offset on those wheels and are you running any wheel spacers? I have the same bumper and I'm trying to remedy a little bit of rubbing.

 

Wow man! Very nice truck! I really like all the awesome mods you've done. Great work!

 

Thanks!

They are just the stock TRD TX Pro wheels that came with the truck and no spacers:
http://trdparts4u.toyotaofdallas.com/scripts/prodView.asp?idproduct=-8542

I actually have near zero rubbing issues though. Only if I crank the wheel fully does the back of the tire touch the frame just a little. No rubbing issues on the bumper. What suspension do you have to support it? If stock that bumper really pulls down the front end. I had the OME kit before this with 886 springs.

I am considering swapping the wheels out for DOT approved bead locks. I was at Shaffer's Off Road the other day and they had some there that were going on a Tacoma but I forget the model. Was very tempting

 

Currently I have the stock TRD suspension, but it was only after I switched to my Method wheels I started having rubbing issues. How do you like the stage 7?

 

I am really happy with them! They ride really good and being able to adjust them is really nice. The OME's I had were way too stiff for certain things.

 

Wow.... Hell of a build!

 

Do you have a body lift at all? When you are in compression is there any rubbing with those tires?

 

One question..did u ever have trouble with your icon suspension in the front

 

Nope, not really. What do you mean by trouble?

 

No body lift, only at full lock do I have rubbing.

 

My front shock ended up leaking on the line to the external bypass and would bottom out the shock cause it was empty...so I found that problem out and one more thing since u have a arb bumper with winch should I get 700 lbs springs? I have the same step up om my tacoma

 

sub'd

 

Oh wow I have not had any problems like that. No leaking.. at least so far Ya I did the 700 lbs springs, they seem about right to me with the ARB bumper and winch.

 

If u don't like your fog light in the bumper u can change them that whAt I did on my bumper go to http://www.labrak.com/ they are real nice no cutting or anything

 

If u had to do it all over again, would u keep 4.56s or go with 4.30s? Thx