2011 tacoma rca adapter

So im trying to install a rca adapter for a stock jbl stereo on a 2011 Toyota Tacoma but i cant seem to find the negative and positive wires for the front speakers. Can anyone guide me on witch ones they are or what color?

 

I have 2011 with JL factory setup, I added an additional 8" sub by tapping into the output side of the amp wires from the factory sub. Worked great!

Green/yellow +
Green/white -

 

But what if i added a amp do i just tap into the sub for the rca?

 

I wired a JL Audio microsub with built-in amp to the output of the OEM amp. It was the only way to make it work.

I even contacted ********* to see about purchasing one of their setups, they do not offer anything that works with the oem jbl audio.

 

Alrighty well ima try it tomorrow and see what happenes hopefully it works for me and thanks

 

Originally only wanted to replace the factory sub and leave everything else stock. No one new how to do that successfully, so I added the additional sub and it worked great.

 

Yeah I wanna leave everything stock and just add the amp and sub

 

What sub did you add

 

An 8 inch JL Audio microsub with built-in amp. Wanted a 10 inch but it wouldn't behind the seat.


https://www.crutchfield.com/p_13693...a&awnw=g&awcr=69546578425&awdv=m&awug=9032131

 

How does it sound with two 8" subs?

 

I need to take it to the audio shop and have them adjust the settings on the new sub, it sounds good. Both the subs are ran mono.

Its not a 10" or 12", but that little microsub sure packs a punch.

 

Oh i got a costume box and 10" kicker rt so hopefully it sounds good

 

Another option would be to remove the factory sub but leave the amp, tapping the outcoming amp wires.

As long as all those plugs remain plugged in on the amp the JBL system will work