2012 tacoma does not clutch in the AC

Hello there , appreciate any comments.
Have replaced the clutch . Jump out ac relay and it will clutch in. When ac is first turned on it appears normal on the switch with the light on but after a few seconds it starts to blink.
Any ideals on where to trouble shoot appreciated.

 

If the AC light is flashing my limited understanding is that it’s low on Freon.
I’d put a cheapo auto store guage on the low side and see if it’s holding any pressure.

Good luck, I love AC…. Despite my Evaporator leaking after only 80K miles and 8 years.

 

The flashing A/C light is when the A/C Amplifier does not detect the proper signal from the Lock Sensor on the compressor.

Since it sounds like the compressor works you either have a problem with the Lock Sensor, Lock Sensor circuit, or internal problem with the A/C Compressor.