2012 TACOMA FRONT END CONVERSION RG11

Thanks guys. One more question. I know you were talking with another guy about hooking up the fog lights? Is the adapter required? The plugs almost look identical. Here is my truck btw still have to get everything painted

 

Adapters are needed, factory plug 11 and below is h10 needs to converted to h11 for the 12-15 style fogs

 

Yeah post #121

 

(52531-04010) and the upper filler retainer fasteners, (little white clips)

 

Any need some oem parts? For this conversion hit me up

 

What all would I need to make my 2006 look like a 2014

 

Check out 1st page

 

For those that reused their clips for the windshield washer hose, what tool(s) did you use to remove those clips? I made an attempt to remove them but it's proving to be a little difficult. And just in case, does anyone have the part # for them?

 

I couldn't take it off with out breaking um and couldn't find part #.s for it. So I used these nylon inserts ( don't know what you call it).Had to trim a little and plastic wire clamps with stainless sheet metal screws.
Top pic shows insert (that one I used for led bolt light) . Theres different sizes. Bottom pic shows hoses mounted.
Didn't answer your question but that's what I did.... lol

 

Doing this conversion could I just keep the old bumper?

 

Nope

 

awesome idea, i think i will do this given i can find parts cheap enough on CL. I dont want to spend to much otherwise i will just get a plate bumper.

 

So should parts like lightbars that mount in 2013 the bumper fit on trucks that have been converted? In other words, after the conversion is complete is the front end identical to that of a 2013 inside and out?

 

Thanks for the info, I have an 06 I'd like to do this to.

 

I already have a thread going but would one of you guys that converted to a 12-15 front end happen to know the part # to this part? I can't find it anywhere.

It's one of the two screws in the bottom of the bumper... the one closer to the middle.

 

Rest of my parts should be here in a couple days... Is there fitment to be done other than bolting on everthing? Hood alignment?

 

I pulled the trigger.. Prett stoked to get it done

 

Almost done with my conversion but I believe I'm missing a clip or fastener that hold the bumper filler to the filler retainer under the head light. Can someone give me a part # or at least a pic of the piece. I already have the bumper filler retainer 53935-04020 on the ends towards the fender. Any helps is greatly appreciated! I'm going to try the local dealership in the morning.

 

I think this should be stickied somewhere, as the 1st post is probably the end-all-be-all guide for getting all the parts.