2012 TRD Baja suspension

Both my front shocks are shot.
Can I just replace the shocks with the 9100s or do I need to buy the complete coil over set?

 

You could ask here

https://www.tacomaworld.com/threads/official-t-x-t-x-pro-owners-thread.120736/page-54#post-24846730

 

Whole set. THere is no just shock option.

 

Are they still available? Can’t seem to find any online. I just put 285s on the truck today and I’m getting a little rub on the tire at full turn.

 

https://www.tacomaworld.com/threads/ptr13-35150-bilstein-trd-pro-lift-kit-600.701638/

 

Front struts/shocks:
PTR13-35120-AF
PTR13-35120-AB

Coils:
PTR13-35120-AA

 

Time to cut where it rubs.

 

You can replace with 6112's.

 

Listen to this guy

 

Hey man!

Unfortunately not the same. Plus I’ve read that they’re on crazy back order right now

 

Well, different dampening and spring rate, no? Otherwise, dimensionally the same?

 

Yes and yes.

Dimensionally, they do look the same but were reportedly to be tuned off of the 9100 series.

 

TRD Baja / 2nd gen TRD pro shocks are simply 6112's with slightly different valving and only 2 notches for ride height adjustment (for taco lean).

get a set of 6112's n call it a day.

 

I’m still waiting for mine. Ordered the pair in early December

 

My lower front bushings are starting to show wear (they are off-center).

Also, the front end rises and dips quite a bit with the supercharger and 6-piston big brake kit. Would this happen with new Bilsteins (6112's OR the TRD Baja/PRO spec) as well or do I need to go to some dedicated coilovers with remote reservoirs with adjustable dampening and compression for high and low speed to keep the front end more level when driving?

 

Will these fit a '10 TRD sport? internet says 2012+ but are they still interchangeable?

 

They will fit

 

Thanks. GTK