SOLD SOLD SOLD. 2012 TRD Sport DCLB overland/adventure build - needs engine work

SOLD

Single owner truck. Clean Title and most service records on hand.
Needs engine work, suspected head gasket. Awesome opportunity for someone. Can be driven very short distance, or will need to be trailed. Was planning on doing the work and keeping, but have flip flopped to selling.
278k miles.

MAKE OFFER for the whole truck, or the truck minus certain parts, etc.
Ask for more photos, come take a look, etc.
Photos in this Google folder: Tacoma Google Folder

New in last 6 months: SPC upper control arms (2nd gen), CV axles, front brake calipers, rotors, brake lines and parking brake cables.
Truck was reliable daily driver used for occasional weekend adventures.

Lifted on Fox Factory 2.0 remote reservoir coil overs up front. Fox Performance Series 2.0 remote reservoir shocks in rear.
All-Pro Off-Road Expedition leaf springs.
SOS shackle flip kit and adjustable shackles.
U bolt flip kit
Timbren bump stops front/rear

FN Verge 17x8.5 wheels (all 5) wrapped in Kenda Klever R/T 35x10.5 tires.
Set of 4 16” wheels with studded snows included as well.

SOS Off Road concept front bumper with 2” receiver and hidden winch, SOS high clearance rear bumper with swing out, SOS rock sliders, SOS skid plates.
All armor is hot dip galvanized.
Painted RCI gas tank skid.
Front bumper has reinforcement plates welded to the frame.
2” receiver for towing behind license plate on rear bumper. 2” receiver welded to swing out for bike rack, etc

Stainless All Pro brake lines to rear brakes. Drum/pads last year.

UpTop Soft Top full height Truss bed rack was extra set of cargo panels.
2 sets (4 total) X-Bull traction boards
Set of quick fists on drivers side for shovel/axe/paddle. Rotopax 3 gallon gas can.

Prinsu roof rack with 36” curved LED light bar. Upgraded fairing and crossbars from Sherpa

Bestop Soft Top. Rear window is brand new.

Rigid Industries 2x2 ditch lights.
LED 2x2 fog lights
2x2 LED back up lights in rear bumper.

EZ down tailgate gas strut.
Mob Off Road steel tailgate skin

Other stuff:
MESO LED map and interior lights
Secondary fuse panel under hood for all accessories
Seat rises for drivers seat
Auto up/down all window switches
Seat covers front/rear
CB radio and 36” Firestik antenna and tuner with PA speaker
Viair medium duty on-board compressor and 3 gallon tank.
3rd Gen “Toyota” grill with raptor style lights
K&N cold air intake
Smittybily XRC 9500# winch
Full recovery kit - kinetic rope, straps, tree strap, D-rings, snatch block, and winch line damper
Tech Deck with Dual Ram mounts
Professionally done cab mount chop

Lots of extra parts, extra front hubs (new), CV axles, front caliper (new), brake lines, oil filters, extra grill, other odds and ends I'm sure.

 

Hello fellow Vermoooonter. Just happen to catch you putting this in the other thread. Subbing, in case someone else doesn't go for it all at once and if you start parting out. There's some non-gen specific stuff I could be into.

But, jebus, that's quite the build out. Someone could get lucky and have something that's already a real slammer when getting knarly in the woods.


Off topic - per your avatar name, you do an orchard and deal in apples? What general area are you in? (for possible apples, as well as possible parts above lol. Feel free to PM if you don't want to show public)

 

Vermont! I'm down in Ferrisburgh, or up depending on where you're at. Let me know what you're interested, via PM and we can look into it. It's been a 10 year+ project, took a long time to get to this point, would love to see someone continue to put it to good use.
I mean, if I was at a different point in life and didn't have projects to take care of at the house, I'd work on a motor swap myself. But here we are...

I have a couple awesome apple trees, but that's about it. Used to go by the name King of the Apples as it related to some bike racing, but that's another life at this point. I do love to eat apples though.

 

<free bump heh>

T'would be down to you from where I'm at. NE of St Albans only a few miles from the border, so not too far from you.

Yeah, hoping that someone will go for the whole of assembled parts. I would have back in my younger years as a first truck / second vehicle. Give it a few weeks and see if there are hits before chunking it out... advertising some other places too I hope?

But if you really feel like doing bits - possibly the Prinsu, but that's slightly invasive (leaving holes and such) and would be great to leave on yours when it goes. From what I've gathered it should go cross-gen. Otherwise just smalls like the rotopax, some X-Bulls for the atv (or the Mrs ). I would be all over the soft top if it was for a short bed, just to help keep the snow out. Maybe hack(saw) and slash it to fit haha.

I'll keep an eye on this and chat back in a few weeks. G.L.!