2012+ Winch Bumper Group Buy Part II

The last group buy was a resounding success and sold out in short order so we are going to do another for production and shipping around the first week of December!

Same deal as last time for our 2012+ Tacoma winch mount bumper.

If we hit 15 then it's $475 shipped to the lower 48 via UPS Ground.

If you are outside of the lower 48 then let me know and I'll quote you shipping accordingly.

UPDATE: GROUP BUY IS CLOSED but have had a few not able to make the purchase. I'll allow 2 more members to take advantage of this until Feb 22 at midnight.

I have received an order for the names in bold.

1. schwangster
2. Cushmaat
3.
4. chosenfew22
5. Loneknight5 (coming to store)
6.
7. Sterdog
8. Don5352
9. FJPescador
10. Pingo
11. Str3tch
12. R0ckm
13. JMPNFSH
14. FixedGearMike
15. Raincity


....

Product info:

Don't want to add an aftermarket bumper to your Tacoma just so you can mount a winch? You are not alone. Aftermarket bumpers are 100-150 lbs, degrade aerodynamics and are expensive. Keep your stock bumper, factory looks and your MPG with the installation of this winch mount bumper within and behind the stock bumper cover.

• Designed and built in Fort Worth, Texas!
• Lighter than most aftermarket bumpers at 63 lbs.
• Built to last. .250" steel winch tub with a .125" facia for a total of .375" of protection up front!
• Full height front and rear winch cradle.
• Light tabs will enable the mounting of most 4" wide LED lights or our 2" Sirius lights.
• Reinforced lower facia with 4 x .130" gussets, adds bashplate protection up front.
• 4" drain holes facilitate access to winch mounting bolts
• Will accept most winches with industry standard 10" x 4.5" bolt pattern.
• Works with either roller fairleads or synthetic style hawse.
• Will not work with a body lift.
• Shackle mounts are mounted through and through, TIG welded front and rear and are drilled .906" ID for .890" OD or smaller pins which is common for a 3/4" shackle. Pins sizes can vary.
• CNC Laser cut.
• Winch mounts come in bare steel only.

Installation documentation. View some or our customer's installs here on our Google+ page.

Please read this winch fitment article for more information about which winch will work with this bumper.

Bumper coating preparation article: http://www.usoffroad.us/bumper-prep-and-paint

Here’s an example of how much this setup will weigh:

Winch mount bumper: 52.50 lbs (63.5 lbs (Tacoma)
Viper winch with no rope: 51.40 lbs
85′ x 3/8″ AmSteel rope: 3.6 lbs
Aluminum hawse: 1.5 lbs
Coating and fasteners: 1 lb
Total weight: 110 lbs (121 lbs Tacoma)

 

Thanks again Brad! Hope we get to 30+ and get the shackles!

 

Thanks, looking forward to putting this on.

 

Bump. Come on guys we need more people.

 

Just keep in mind that it's about 4 weeks from the time we have enough on the list until the bumpers are ready to ship. If we get more people on the list a little quicker then I can push that some.

 

I'm in. I have been looking at this setup for a couple months and it will fit my needs/wants perfectly.

 

Added.

 

shipping to 96701?

 

PM sent.

Look up HiFire here on the forums, he's in Hawaii as well and bought one on the last group buy. I'll do the same deal for you as I did for him.

 

subscribing.... really trying to see if I can afford this in the near future

 

so is there a link to how this is installed? what needs to be trimmed etc? ive searched some threads but people havent really posted a step by step...just mostly before and after pictures. i also checked the website and found nothing...dunno if im just missing it.
thanx

 

Yep...you're just missing it.

Bumper page: http://usoffroad.us/store/tacoma-bumper-2012

At the bottom is the install doc: https://www.usoffroad.us/store/docs/taco-12-install.pdf

Be sure to read the FAQ tab and the other links like the winch fitment and bumper pre articles.

I added most of the info in the first post above as well.

 

Thank you!!

 

You are welcome... now post up a pic of the T/A. I've had quite a few ranging from 72 to 78.

This is my current baby. 69, 408 (Scat forged, all roller, aluminum heads, etc), Art Carr 2004R, 12 bolt 3.73/Auburn, QA1 coil overs, Helwig bars, tubular control arms, CPP 13"/12" brakes..etc etc.


but I digress...

 

Ship to APO? Curiosity is killing me.

 

The problem with APO's is that these are too big for USPS and must go UPS...but, as you well know, UPS won't deliver to an APO... or any kind of PO Box.

http://www.ups.com/content/us/en/resources/ship/packaging/guidelines/how_to4.html

I hate it because I want to take care of anyone serving our country but I'm not sure how to make that happen in this case.

 

I figured as much. It's no worries just means I can spend more when I get back to the states.

 

PM me your APO address... let me work on this.

 

This is perfect, I will start harassing my wife immediately.

 

wow..that thing is sweet...love 69's. hope to have one some day down the line.

mine is not as pretty but it goes like hell...lol.