2013 Tacoma Popping and Clunking - SOLVED: Loose control arm bolts

At my wits end trying to figure this one out and could use a few pairs of fresh eyes. 2013 Tacoma which recently started popping and clunking from the drivers side front when articulated. I've checked the suspension, bushings, and brake pads. I've used lithium grease in an attempt to isolate the issue, pry bar to check bushings for any excess movement, and all bolts and nuts are fastened and torqued to spec. Most recent work done was an alignment about 2 months ago with no issues. This issue appeared 2 weeks ago and is getting progressively worse.

Could use some help from the collective on what might be going on here.