2014 Taco Viper alarm help!

Hello all, asking for help here on my 2014 Toyota Tacoma Passenger Door Lock.
I followed the wire diagrams available on the Internet. They all say to locate the Blue/Red wire & the Blue/Black wire in the driver kick panel. Found them and hooked up according to the 5-Wire diagram below. The driver door works perfect. It Locks & Unlocks correctly. The passenger door does Zero-Zilch-Nada.
I pulled the passenger door panel and tested the same wires (Blue/Red & Blue/Black) that are located in the driver kick panel. They are the same wires. Just not getting the +/- pulse. This is not my first time using the 5 wire relay setup. What am I missing?
Has anyone had this issue and figured out how to make the passenger door work correctly?
Thanks for your help!

 

nobody?

 

Call Viper, you might not be the first to have problems like this.

 

Well I tried contacting their support area and all they say is "take it to an authorized installer." Which is not alot of help since I installed myeslf, and done many alarms, just never had this happen lol.