2015 Toyota Tacoma Transmission Oil Line rubber hoses connections

I recently replaced two corroded transmission oil lines in my 2015 Toyota Tacoma. I marked the intake line with blue tape on all connecting parts. I captured a photo of the hoses connected to the end of the transmission lines. However, I am uncertain they the correct hose is going to the correct line. Does anyone have a photo of the hose connecting at both ends. I want to make sure the inlets and outlets are aligned properly.

The attached photo was taken prior to start of work. The outside hose is connected to the top line. And the inside hose is connected to the bottom line. The breakout diagram from Toyota is mostly useless because it only gives a general idea of where things connect but no specifics. I also found a photo that shows the hoses crossing over each other. Will this be an issue if they are connected backwards?

Thank you for reading and lending a hand.