2016-2019 SR/Limited Grille light brackets

I had these made to mount a set of Diode Dynamics 6” Stage Series in the grille of my 2019 SR. They test fitted great, but when I designed them, I forgot to account for the rotational point. So if you move them too far off of straight out, they aim down into the grille more than I liked. These will fit this type of grille:


And when installed, they will look like this:

This is just the upper lights, not the lowers. I also made these to accept raptor lights if you are so inclined. The raptor light idea was stolen from @jrich44 (hope he doesn’t mind…) So I strongly suggest you reach out to him to get the hook up on the lights. https://www.tacomaworld.com/threads/grille-light-kits.660952/#post-23123185
They accept the oznium 11mm type of light. These come in different colors, so get wild if you want.

$10 Oznium Brightest Light Bolt - Flush Mount 12V LED Light for Bumper, Grille, Cars Interior, Dash, Ambient Lighting, Motorcycle w/Sleek Aluminum Housing & Screw Nut (11 mm Black, Blue LED)

https://www.amazon.com/BRIGHTEST-Li...qid=1683742731&sprefix=oznium+,aps,133&sr=8-3 If you go for the grille lights, they will look pretty much like this:

But spaced out a little bit more. Sorry you don’t get any real world pictures, but this should give a good idea of what they are. I didn’t get these painted or coated or anything, so that part will be up to you. You’ll also need the following: (8) #10 X 3/4” sheet metal screws, (4) M5 X 20mm machine screws, and (4) spacers 10mm or 3/8” long, with a hole big enough for the M5 bolt (it can be bigger too, just don’t go too big).

As to cost, these are free to anyone who will use them. I know that these are rough (as far as how completed the set up is), but they are free if you want to take over the project. It really isn’t much needed, and I’ll send instructions on the install as well.
Here is what you’ll be getting (this is just one side, you’ll get drivers and passengers).

Shoot me a PM. I only have the one set, so first come gets it.

 

Did a test fit of the revised design and grabbed a couple of pics.

 

No takers yet? I'll drop the price 20%

 

Packing up for the recyclers now, last chance!