2016 stuck in 4 low??

Anybody had this problem yet? I've tried everything. Truck has never even been in 4wd and has 3000 miles.

 

nope.

 

That's a common problem on 2nd gens. Figured yoda would have fixed by now. You can manually shift the T-case if you are in a pinch, just unbolt the actuator and slide the shaft to the outermost position (2hi). Make sure you are doing it right, look on the visor for instructions. It's also in you manual. Must go to 4hi, then to 2hi. If it's blinkin' it's thinkin'. Rock back and forth to unbind the drivetrain.

 

Auto or manual? TrdOR or basic

 

How can the truck be in 4 low, if 4wd was never engaged?

 

Well I mean it's the first time in 4 wd.

 

Auto trd sport.

 

You are in neutral? Try backing very slowly (1 mph) in a straight line. As mentioned if its blinking its thinking!

 

I've tried backing up

 

You are going from 4lo to 4hi correct? Not 4lo to 2hi?

 

Yep

 

What is the dash light doing?

 

Blinking 4 low

 

Hmm...try putting the selector back to 4lo driving straight forward for a bit, 100yds or so, then retry shifting out.

 

Forward till the light no longer blinks

 

Hell I drove it 3 miles home. Still nothing.

 

With the selector in 4lo and still it just blinks? I think it's probably time to call the dealer.
Sorry I couldn't help you more.

 

Yep I tried it in 4 low. Tried 4 hi backed up drove forward. Idk but I'm hot!!!

 

I had the same issue but I have a manual.... turned truck off turned knob to 4hi turned truck back on and it clicked out of LO... only happened 1 time to me .... GL

 

Is it actually in low gear? You'd only be able to do about 40mph if it was. If it's not physically in low gear, put it back in 4hi and drive around till the light goes solid, then switch to 2hi. Does the 2016 still have the card in the visor? Most people never read it.