2016 Tacoma line level amplifier wiring harness(might fit other models)

I made this several years ago. It worked great. Getting rid of it because I upgraded my head unit. I used this on my 2016 Tacoma with the 6” screen. This will plug into your factory radio and the factory harness. It will give an aftermarket amplifier a line level input from the factory radio and the amp will then power your speakers through the factory wiring. Basically as plug and play as it gets. The blue wire is for the amp-on signal.

since my 2016 SR only has front speakers this is good for the front only. I do have the male/female connectors that are for the rear speakers that I will include but they are not rigged up. All connections were tied together properly then soldered and shrink tubed. Speaker wires are 14 gauge and everything is labeled. I ran this from the head unit to under the passenger seat with plenty of slack.

it was made using

$8 Metra 70-1761 Radio Wiring Harness For Toyota 87-Up Power 4 Speaker

Metra 70-1761 male connector kit and the

$12 Metra 71-1761 87 - 94 Toyota Vehicle Harness

Metra 71-1761 female kit. Best to see if those are the connectors for your application as far as fitment goes.

asking $25 shipped.