2017 Tacoma quicksand lift questions???

I currently just purchased a 2017 Tacoma trd sport 4x4. I've been doing a lot of research on lifts pushing towards the OME lift from toytec with light racing uca. Just curious will aftermarket 16x8 wheels fit without rubbing uca? Tire size I'd like Togo with 265 75r16. Any help would be greatly appreciated also other set ups y'all prefer thanks!

 

Depends on the offset and backspacing

 

I was checking out the vision 398 Manx
16x8
0 offset
4.5 backs spacing

 

Shouldn't need UCAs unless going over 2" of lift. Recommend sticking under 2" of lift. Also research the 6112/5160 combo. A lot of folks are running 6112s /5160s with a 3 leaf progressive AAL for about 2" of lift and the setup gets outstanding feedback for maintaining much of the factory ride characteristics on road while improving upon offroad ride & performance. See my write up in sig block if you are interested in researching that route.

 

Here is mine with a 1inch lift in the front, stock rear 16x8 with 265 75s.

 

As far as wheel specs i think the general agreement is on a -12 offset with 4 to 4.5" backspacing